WildWill
New Member
Hey all,
I got the heads-up about this place from a fellow musician on another forum.
I have a 1973 Charger SE that I bought back in 1993 or so. Arizona car, no rust to speak of (except what started under the vinyl top
but has since been repaired).
It was originally a 400 low-deck 2BBL/727 car. Pulled that out after it became very tired with the intent of just freshening it. Due to internal issues I determined that it needed a complete overhaul and decided to "kick it up a notch" while I was in there. Long story short, I have a 456" stroker (using a forged 440 crank, offset ground) going together for it.
Anyways, that's my car in my avatar. It was used for the pog picture for Playing Mantis' "Johnny Lightning" 1/64 scale "American Muscle" series. I thought that was pretty cool. :annoying_dancer:
It looks like I'll be reading quite a bit here before I get to posting. Ton's of information in these parts!
Will
I got the heads-up about this place from a fellow musician on another forum.
I have a 1973 Charger SE that I bought back in 1993 or so. Arizona car, no rust to speak of (except what started under the vinyl top
but has since been repaired). It was originally a 400 low-deck 2BBL/727 car. Pulled that out after it became very tired with the intent of just freshening it. Due to internal issues I determined that it needed a complete overhaul and decided to "kick it up a notch" while I was in there. Long story short, I have a 456" stroker (using a forged 440 crank, offset ground) going together for it.
Anyways, that's my car in my avatar. It was used for the pog picture for Playing Mantis' "Johnny Lightning" 1/64 scale "American Muscle" series. I thought that was pretty cool. :annoying_dancer:
It looks like I'll be reading quite a bit here before I get to posting. Ton's of information in these parts!
Will
