windshield molding clips

[roadrunnerman]

Took the chrome trim off my 69 RR's windshield. My question is were the clips mounted with screws or were they factory put on with studs? I will need to replaced them so i will also need to know where/who has the gasket for the windshield as that will have to come out.

 

[wannadrag]

Clips held with screws and just about any vendor has the gaskets.

 

[kidmopar]

be sure to put a lil rtv on the screws and prime the screw holes before u install the clips so it dont leak or rust there.just wanted to help ya out

 

[wannadrag]

Some of the kits actually come with the rubber on the screw tips.

 

[roadrunnerman]

Thanks guys,apprieciate the replies.

 

[STREETREBEL]

I have a differant question.
How do I take the trim off around the front and back windshield?
Without bending them ?

 

[roadrunnerman]

You would have to get a windshield removal tool. I don't have one to get you a picture but it is shaped like a "Y" with little hooks on each end. I took mine out with a small screwdriver and pried them up. I got lucky and didn't bend them.

 

[1948 santa]

You would have to get a windshield removal tool. I don't have one to get you a picture but it is shaped like a "Y" with little hooks on each end. I took mine out with a small screwdriver and pried them up. I got lucky and didn't bend them.

Windshield trim removal tool by Mac tools part #MR215