4mulas
Well-Known Member
- Local time
- 8:50 PM
- Joined
- Mar 16, 2017
- Messages
- 2,071
- Reaction score
- 2,344
- Location
- Just North of Great Falls
Another what’s it worth thread! 
might buy a short block that I flat out don’t need! Lol. But sometimes if things are around and the price is right you just should.
short description:
- 69’ 383 block, steel crank, stock rods, from a previous low mile build
- it’s .030 over with fresh hone, nice cross hatch no ridge, cylinders mic’d for square
- New KB hypereutectic pistons, KB 162.030
- moly rings apparently file fit to 25 or 27 thou (I think that’s what he said they did)
- new bearings
- new comp baby cam XE 262H 218/224 @ .050, .462/.470 lift
- new comp lifters
- melling high pressure pump
- double roller timing set
the price I’m looking for is - what’s a really good deal, there is value here but the build and motor doesn’t really excite me too much. I know I’ll have to take it apart and recheck everything, so there’s always a chance to find some BS somewhere that could render it useless. you know - the risk factor!
what is a I can’t say no price On this?
thank you for the replies!
might buy a short block that I flat out don’t need! Lol. But sometimes if things are around and the price is right you just should.
short description:
- 69’ 383 block, steel crank, stock rods, from a previous low mile build
- it’s .030 over with fresh hone, nice cross hatch no ridge, cylinders mic’d for square
- New KB hypereutectic pistons, KB 162.030
- moly rings apparently file fit to 25 or 27 thou (I think that’s what he said they did)
- new bearings
- new comp baby cam XE 262H 218/224 @ .050, .462/.470 lift
- new comp lifters
- melling high pressure pump
- double roller timing set
the price I’m looking for is - what’s a really good deal, there is value here but the build and motor doesn’t really excite me too much. I know I’ll have to take it apart and recheck everything, so there’s always a chance to find some BS somewhere that could render it useless. you know - the risk factor!
what is a I can’t say no price On this?
thank you for the replies!