• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

won, t start

check voltage in and out of ballast with volt meter.should be over 12 with key in run and around 9ish out.most common prob is ign module.
 
If it is still running the stock lean burn system replace it with something else.
 
put a timing light on it, if line all over the place and not steady replace chain .
 
Hemi 86613 said:
Did you have to turn the distributor to get it to run? its possibly a chain issue. I have had several plastic coated gears let me down

Was running good till the weather changed .I will have to find my timing light.
 
Back
Top