Would I have a bad ignition switch?

[Dominic Torreto]

something I forgot to mention

I do have the chrysler wiring diagram and it helped a lot. As for the service manual I am going to get one. As for anymore problems as of this point this is the last post that needs to be taken care of then I am off to test drive the car. There was something I forgot to mention that may or may not help at all on the troubleshooting but I do have to have a test wire from the battery to the ignition coil everytime to start the car. I forgot to mention that but anyways I am going to get a service manual. A matter in fact if you take the jumper wire off it turns off the car even after it is started. Today I am going to buy an ignition switch pretty sure thats what it is.

 

[Dominic Torreto]

Good news!!!!!!!!!!!!!!!!!!!!

I have just fixed the ignition. I give props to the one person that said check the starter relay. Right before I went to bed I checked were the yellow wire went and it goes on the starter relay while looking at the diagram. What happened was a person that was helping me out put the wrong wire on the relay and took that yellow wire off. Picture the independence day(1996) song lol. Thanks guys