WTB 426 Hemi pistons and pushrods

[rev.ronnie]

Looking for a set of .030" or 040" over forged pistons in good condition.

10.5:1. Can be higher dome if I can machine it down.

1/16" 1/16" 3/16" ring pkg.

Standard stroke, rod length and 1.03" pin.

I'm thinking standard length pushrods would be fine. I have OEM rockers and a solid cam.

Just fishing for a good deal. Piecing an engine together from "internet finds" ...

Thanks!

 

[thomas patti]

have a bunch of hemi stuff ,will get a list of what I have that I don`t need,patti

 

[Moparsal]

I have nice valve covers when your ready,
Sal

 

[rev.ronnie]

have a bunch of hemi stuff ,will get a list of what I have that I don`t need,patti

Thanks, let me know.


Sal, thanks, but I already got a set of covers on here . Unless you have something real strange...

 

[Gold dust]

Pistons

Looking for a set of .030" or 040" over forged pistons in good condition.

10.5:1. Can be higher dome if I can machine it down.

1/16" 1/16" 3/16" ring pkg. I have pistons pm me .

Standard stroke, rod length and 1.03" pin.

I'm thinking standard length pushrods would be fine. I have OEM rockers and a solid cam.

Just fishing for a good deal. Piecing an engine together from "internet finds" ...

Thanks!

I have a set of pistons .030 like new cheap.

 

[rev.ronnie]

I have a set of pistons .030 like new cheap.

PM me some specs on them. Bore, pin height, compression, ring pkg. pin size and dome volume, or as much of that as you have.


Thanks, Ron

 

[rev.ronnie]

Found a set today. The guy dropped them off too!

M/T pistons/ rings, new!