69roadr
Well-Known Member
- Local time
- 10:48 PM
- Joined
- Mar 1, 2012
- Messages
- 1,587
- Reaction score
- 1,107
- Location
- Golden Valley AZ
I noticed that my pass. side rear wheel looked like it had slight neg. camber, so i jacked the car up, removed the wheel and brake drum, and noticed it had some play in it while wiggling it around. i have never attempted rear-end work, and have no idea where to start. am i going to need any special tools for this? what parts will i need to repair? (bearing, seal, etc.) can i buy these parts at a local auto parts store. i will also be rebuilding the wheel cylinder. is this an easy job? i just dont want to get to a point where i am stuck, and then have to call a travelling mechanic!
btw, the car is a 69 Roadrunner 383.
btw, the car is a 69 Roadrunner 383.