FOR SALE Getting out of the business......scrapping everything if no interest.

[moparmaniac10]

I have been building cars for over 20 years. I have also been parting out cars that long. Just in the past 10years though I have been doing nothing but Mopar. Well for the past couple of years, with the economy sucking, no one is buying parts. I've even had parts that I have tried to give away with no luck. So after spending this past weekend at a Mopar swap meet and car show, I have decided to get out. I have a bunch of belvedere/satellite parts, some 73-74 charger parts , and also some 70-76 a-body duster /dart parts in my possession. With that being said, I am scrapping all the parts, unless someone comes forward. I have 67 belvedere/satellite hood (rust free), doors(needs 2 patches), and trunk lid(rust on lip only). 73-76 duster/dart doors (practically rust free). I have 3 radiators laying around. I also have various trim pieces for the dart and belvedere. This is just a touch of what I have. I can't write it all here. Maybe someday, when things turn around, I will have the patience to deal with this again. Thanks to all that have bought parts from me in the past.

 

[bigowhiteboy]

I am in some serious need of some 66/67 belvedere parts. I have recently picked up 2 cars that need quite a bit of parts to put them back together. I have a thread up in the 66-70 section about how deep into it I am, with pictures.
Anyhow, I need a trunk lid, both front fenders, rear quarters, and bumpers, splash guards, and more.
Do you have a list of parts you have available, and prices? Thanks

 

[moparmaniac10]

Are you coming to pick up the parts? I am not shipping anything that big. All I have from your list is the trunk lid. I know there are some taillight housings, finish panels, front bumper brackets, taillight extensions, and grill. I threw out the door panels and heater air box already. I also scrapped the radiator.

 

[Bigal75]

I'm looking for a front frame rail for a 67 b-body, drivers side. Let me know!

 

[Runner 68]

68 RR / Satty right (passenger side)fender?

 

[bigowhiteboy]

No I most likely will not be driving to Illinoise to pick up a trunk lid. Thanks anyhow.

 

[moparmaniac10]

No fenders or frame rails.

 

[MNBiker]

Happen to have a transmission cross member for a 4 speed 68 Runner?

 

[bm02tj]

what have you for a 1973 ply ssp will be starting on this fall or winter
for sure I need rear bumper and chrome molding around right rear quarter window that I was going to have rechromed

Bruce

 

[moparmaniac10]

don't have either of those

 

[terzmo]

chrome rocker molding for 66 coronet 500 or 67 R/T ?

 

[moparmaniac10]

The only trim I have left is for a 4 door. I am looking for that same rocker trim.

 

[FlyinBolts]

Anything left for a '73 charger? Front Valance, door skins, wiring harness, wiper linkage etc?

Thanks,

FlyinBolts

 

[moparmaniac10]

Had door skins, but scrapped them cause no one wanted them. I have a rear right quarter panel that is brand new. I have a guy coming to my house on thursday to buy every part I own. Selling everything for $350. This is the deal of a lifetime for him. I can't believe i'm doing it, but I can't stand the parts sitting around anymore. Time to focus on what makes me money. Parts do not, restoration and collision work does.

 

[moparmaniac10]

All of my parts are gone with the exception of a hood for a 67 and a right side exhaust manifold for a big block.

 

[edemestihas]

Parts

Do you have any exhaust manifolds for a 440. I also need the trim piece for the windshield that runs vertical on the passenger side.

 

[TRAMO]

would you have the drivers side defrost nozzle/manifold for 67 satellite.thanx randy

 

[khuff]

Any 71 SSP passenger fenders ?

 

[Jonnyuma]

.

- - - Updated - - -

All of my parts are gone with the exception of a hood for a 67 and a right side exhaust manifold for a big block.

Pretty much sez it all...

 

[mustangsqd]

Hi ! I need a deck lid for a 70 RR...

Thanks!