FOR SALE Getting out of the business......scrapping everything if no interest.

Mopar Parts Cars/Parting out

Thread Status:
Not open for further replies.
  1. moparmaniac10

    moparmaniac10 Well-Known Member

    Messages:
    278
    Likes Received:
    9
    Joined:
    Oct 31, 2010
    Location:
    Illinois
    Local Time:
    9:46 PM
    Contact Seller
    I have been building cars for over 20 years. I have also been parting out cars that long. Just in the past 10years though I have been doing nothing but Mopar. Well for the past couple of years, with the economy sucking, no one is buying parts. I've even had parts that I have tried to give away with no luck. So after spending this past weekend at a Mopar swap meet and car show, I have decided to get out. I have a bunch of belvedere/satellite parts, some 73-74 charger parts , and also some 70-76 a-body duster /dart parts in my possession. With that being said, I am scrapping all the parts, unless someone comes forward. I have 67 belvedere/satellite hood (rust free), doors(needs 2 patches), and trunk lid(rust on lip only). 73-76 duster/dart doors (practically rust free). I have 3 radiators laying around. I also have various trim pieces for the dart and belvedere. This is just a touch of what I have. I can't write it all here. Maybe someday, when things turn around, I will have the patience to deal with this again. Thanks to all that have bought parts from me in the past.
     
  2. bigowhiteboy

    bigowhiteboy Well-Known Member

    Messages:
    165
    Likes Received:
    21
    Joined:
    Jul 24, 2011
    Location:
    NW Montana
    Local Time:
    8:46 PM
    I am in some serious need of some 66/67 belvedere parts. I have recently picked up 2 cars that need quite a bit of parts to put them back together. I have a thread up in the 66-70 section about how deep into it I am, with pictures.
    Anyhow, I need a trunk lid, both front fenders, rear quarters, and bumpers, splash guards, and more.
    Do you have a list of parts you have available, and prices? Thanks
     
  3. moparmaniac10

    moparmaniac10 Well-Known Member

    Messages:
    278
    Likes Received:
    9
    Joined:
    Oct 31, 2010
    Location:
    Illinois
    Local Time:
    9:46 PM
    Are you coming to pick up the parts? I am not shipping anything that big. All I have from your list is the trunk lid. I know there are some taillight housings, finish panels, front bumper brackets, taillight extensions, and grill. I threw out the door panels and heater air box already. I also scrapped the radiator.
     
  4. Bigal75

    Bigal75 Well-Known Member

    Messages:
    934
    Likes Received:
    229
    Joined:
    Aug 18, 2011
    Location:
    Ottawa Ontario Canada
    Local Time:
    10:46 PM
    I'm looking for a front frame rail for a 67 b-body, drivers side. Let me know!
     
  5. Runner 68

    Runner 68 Tarnished Bronze Member FBBO Gold Member

    Messages:
    3,090
    Likes Received:
    3375
    Joined:
    Feb 22, 2013
    Location:
    The Red Anvil Dog House
    Local Time:
    8:46 PM
    68 RR / Satty right (passenger side)fender?
     
  6. bigowhiteboy

    bigowhiteboy Well-Known Member

    Messages:
    165
    Likes Received:
    21
    Joined:
    Jul 24, 2011
    Location:
    NW Montana
    Local Time:
    8:46 PM
    No I most likely will not be driving to Illinoise to pick up a trunk lid. Thanks anyhow.
     
  7. moparmaniac10

    moparmaniac10 Well-Known Member

    Messages:
    278
    Likes Received:
    9
    Joined:
    Oct 31, 2010
    Location:
    Illinois
    Local Time:
    9:46 PM
    No fenders or frame rails.
     
  8. MNBiker

    MNBiker Well-Known Member

    Messages:
    191
    Likes Received:
    58
    Joined:
    Jan 22, 2013
    Location:
    Sauk Rapids, Mn
    Local Time:
    9:46 PM
    Happen to have a transmission cross member for a 4 speed 68 Runner?
     
  9. bm02tj

    bm02tj Well-Known Member

    Messages:
    2,252
    Likes Received:
    4113
    Joined:
    Jan 27, 2013
    Location:
    BC Canada
    Local Time:
    7:46 PM
    what have you for a 1973 ply ssp will be starting on this fall or winter
    for sure I need rear bumper and chrome molding around right rear quarter window that I was going to have rechromed

    Bruce
     
  10. moparmaniac10

    moparmaniac10 Well-Known Member

    Messages:
    278
    Likes Received:
    9
    Joined:
    Oct 31, 2010
    Location:
    Illinois
    Local Time:
    9:46 PM
    don't have either of those
     
  11. terzmo

    terzmo Well-Known Member

    Messages:
    1,493
    Likes Received:
    471
    Joined:
    Jul 6, 2011
    Location:
    buffalo,ny
    Local Time:
    10:46 PM
    chrome rocker molding for 66 coronet 500 or 67 R/T ?
     
  12. moparmaniac10

    moparmaniac10 Well-Known Member

    Messages:
    278
    Likes Received:
    9
    Joined:
    Oct 31, 2010
    Location:
    Illinois
    Local Time:
    9:46 PM
    The only trim I have left is for a 4 door. I am looking for that same rocker trim.
     
  13. FlyinBolts

    FlyinBolts New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Jun 2, 2013
    Location:
    Michigan
    Local Time:
    10:46 PM
    Anything left for a '73 charger? Front Valance, door skins, wiring harness, wiper linkage etc?

    Thanks,

    FlyinBolts
     
  14. moparmaniac10

    moparmaniac10 Well-Known Member

    Messages:
    278
    Likes Received:
    9
    Joined:
    Oct 31, 2010
    Location:
    Illinois
    Local Time:
    9:46 PM
    Had door skins, but scrapped them cause no one wanted them. I have a rear right quarter panel that is brand new. I have a guy coming to my house on thursday to buy every part I own. Selling everything for $350. This is the deal of a lifetime for him. I can't believe i'm doing it, but I can't stand the parts sitting around anymore. Time to focus on what makes me money. Parts do not, restoration and collision work does.
     
  15. moparmaniac10

    moparmaniac10 Well-Known Member

    Messages:
    278
    Likes Received:
    9
    Joined:
    Oct 31, 2010
    Location:
    Illinois
    Local Time:
    9:46 PM
    All of my parts are gone with the exception of a hood for a 67 and a right side exhaust manifold for a big block.
     
  16. edemestihas

    edemestihas New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Jun 6, 2013
    Location:
    CA
    Local Time:
    7:46 PM
    Parts

    Do you have any exhaust manifolds for a 440. I also need the trim piece for the windshield that runs vertical on the passenger side.
     
  17. TRAMO

    TRAMO Well-Known Member

    Messages:
    380
    Likes Received:
    28
    Joined:
    Mar 21, 2013
    Location:
    LEBANON TN
    Local Time:
    9:46 PM
    would you have the drivers side defrost nozzle/manifold for 67 satellite.thanx randy
     
  18. khuff

    khuff New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Jan 7, 2014
    Location:
    michigan
    Local Time:
    9:46 PM
    Any 71 SSP passenger fenders ?
     
  19. Jonnyuma

    Jonnyuma Well-Known Member

    Messages:
    823
    Likes Received:
    160
    Joined:
    Nov 15, 2010
    Location:
    A dirty little town in eastern Oregon
    Local Time:
    9:46 PM
    .

    - - - Updated - - -

    Pretty much sez it all...
     
  20. mustangsqd

    mustangsqd New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Mar 4, 2014
    Location:
    Miami
    Local Time:
    9:46 PM
    Hi ! I need a deck lid for a 70 RR...

    Thanks!
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.