Anyone see the new Don Garlits aluminum heads?

[bigmanjbmopar]

StreetFighter and StripFighter Series starting at $1195/complete with valves, springs,retainers

 

[benno440]

where is the link please?

 

[Photon440]

I can't find anything on them either. Did Don Garlits recover from the stroke he had last winter?

 

[Dreadl0ck]

Can't find anything about them online - so if you do - please tell.

 

[mosquito13]

first hit on google???https://www.facebook.com/ChryslerPower?hc_location=timeline and their link for more info http://chryslerpower.com/. If It has The King Rats name on it I want to find out more.

- - - Updated - - -

just spent 10 min looking deeper and couldn't find much. posted on their face book page asking for link to product.

 

[Dreadl0ck]

Yea, I went down that road too but can't find more info about them.

 

[themechanic]

From their Facebook: Bruce Toth,

"I did the port work on the head Roland is displaying, these are a great made in America head with a lot of potential with the various stages of porting available through the CPPA parts store. Contact them now and get yours on order today."

"What do you want to know email me at Tothperformance@zoominternet.net."

 

[bigmanjbmopar]

I would like to know if these are for a pair of each?

 

[bigmanjbmopar]

CPPA Street Fighter heads
USA made from A356 T6 aluminum; combustion chamber volume 84cc; exhaust runner volume 70cc; Intake runner volume 210cc; Angled spark plug location; Intake valve diameter 2.14; Exhaust valve diameter 1.81; 15 Degree valve angle; valve stem diameter 11/32; Valve guide material Bronze; Stainless valves; Direct bolt on; oil through head like stock... $1195 complete for hydraulic apps and $1395 for solid apps... porting and polishing options available... ph 888.548.2282 NOW!!!

 

[benno440]

wonder what they are capable of porting wise

 

[Kern Dog]

The spec sheet sounds a bit like one from Edelbrock

 

[ChargerST]

Is it just me or are most of the budget heads pretty much the same? Edelbrock, ProMaxx, Sidewinder, Don Garlits.. Stealth heads are slightly different but not much. What I don't get is that all of them use a very old chamber design when there are much more efficient designs out there.

 

[Photon440]

I find it odd that there's no mention of them on the Chrysler Power magazine website, just their facebook page. And even then, there's no link to any site for those heads other than facebook.

And Garlits isn't mentioned anywhere at all.

On the other hand, there's lots of stuff for CPPA. None of it related to Mopars. http://acronyms.thefreedictionary.com/CPPA

 

[bigmanjbmopar]

Explains CPPA at least. I never even knew any of this was going on. Guess raising a family gets in the way of a lot of stuff you love In a good way of course

http://www.chryslerpower.com/index.php/about-us


You have to call them they are old school for sure.

I find it odd that there's no mention of them on the Chrysler Power magazine website, just their facebook page. And even then, there's no link to any site for those heads other than facebook.

And Garlits isn't mentioned anywhere at all.

On the other hand, there's lots of stuff for CPPA. None of it related to Mopars. http://acronyms.thefreedictionary.com/CPPA

 

[TekHousE]

Guys I am considering these heads against Eddie RPM's.

I got these emails from Mr. Toth..

The heads are comparable to the Edelbrock RPM heads they floe 258.2 cfm out of the box. They come with 2.14 intake and 1.81 exhaust stainless valves. We can send them less valves and retainers if you are going to get those from Hughes. The heads are cast for us by a foundry in California I do any port work that the customer requests.

Thanks, Bruce

And then I asked about the price:

Yes $1195.00 is for two heads, $1395.00 for solid flat tappet cam set up. I would have to check on the price of the roller springs.

He mentions roller springs since I told him I am looking at the Hughes Whiplash cam but their roller version of it.

 

[mopar12372]

im giving up my non used 440source heads for these !! anyone want them?

 

[challenger666]

How much do you want for the 440 source heads?

 

[Dreadl0ck]

+1 on the 440 source lol.

 

[mopar12372]

please private message me. thanks

 

[TekHousE]

Sent to me by Bruce:

Level two porting results are as follows.

Lift cfm intake cfm exhaust
.100 55.1 68.9
.200 130.8 109.8
.300 197.6 142.4
.400 236.8 166.3
.500 252.6 182.6
.600 265.2 189.8
.700 266.7 193.6