Edelbrock E Street Head owners

[ykf7b0]

I would like to hear from those who are using Edelbrock E Street heads and give me your thoughts on these heads. I also need to know if stock rockers and pushrods will work them. I am attracted to these heads for their combustion chamber cc volume of 75 (part # 5090) and Edelbrocks good reputation. Edelbrock is offering a $150.00 rebate if a set if purchased before Dec 31, 2016 making them seem like a great choice for me.

 

[ykf7b0]

Anyone?

 

[Rick Carson]

E street heads are a great head to use on a 67 or older motor,that had closed chamber heads, or a smog motor you want to bring to life. they don't flow quite as well as a regular performer head,but they are damn close

 

[ykf7b0]

Thanks! What about using stock style rocker arms and stock length pushrods with a hydraulic cam?

 

[lewtot184]

Thanks! What about using stock style rocker arms and stock length pushrods with a hydraulic cam?

stock rockers should work, but i bet push rods won't. i had to order custom length push rods for the rpm's i'm using and they're basically the same as e-streets with exception to the chambers.

 

[ykf7b0]

stock rockers should work, but i bet push rods won't. i had to order custom length push rods for the rpm's i'm using and they're basically the same as e-streets with exception to the chambers.

Thanks lewt! Where did you get the custom pushrods?

 

[lewtot184]

Thanks lewt! Where did you get the custom pushrods?

smith brothers. shelf push rods wouldn't come close to working while maintaining proper geometry.