Looking for Mopar Caps

[Victory]

I recently ordered a set of Wheel Vintiques 63 series rims for my 71 Roadrunner. For whatever reason it was completely omitted from my order that the OE mopar caps (SKU: 2050) were out of stock. Upon calling WV up, they have no ETA on a restock.

I've checked Ebay and every other place that I can seem to find that would sell these. None of them have any stock.

Does anyone know where these caps can be found? Does anyone have a set of 4 for sale? Or are there any other options that fit the Wheel Vintique 63 series rim. I'd greatly appreciate being pointed in the right direction for this.

Thanks,
Al

 

[Lefty71]

I think I have a pair of those, that have never been on a wheel. I can look up a cost and check shipping from Ohio if you think you are interested. Looks like Jegs shows a ship date of January, 2020....

 

[Victory]

I think I have a pair of those, that have never been on a wheel. I can look up a cost and check shipping from Ohio if you think you are interested. Looks like Jegs shows a ship date of January, 2020....

I contacted the manufacturer and they don't have an ETA on a restock. I'm wondering if original mopar caps will work. I'm not sure if the 63 series are exact replicas of the original wheel.

You can shoot me a private message if you find them and we can work something out. Would be nice to find four, though.

 

[randys4406]

I have a lot of caps. Not familiar with that number. PM me with a picture and I will see if I have a set. They would be 8-3/4" ID for a 71.

 

[randys4406]

Is this what you are looking for?

 

[Lefty71]

Is this what you are looking for?

For anyone following this... the ones the OP mentioned specifically do not have any writing or OEM car division on them. I did dig the pair out that I have, and I have checked them without installation (not snapping them on so I have to pry them off) on the wheels that I have, because there have been doubts that they would fit factory rims. They are SKU #2050, they do indeed fit the Wheel Vintiques #63 rims, as they say on the box. They have also fit up fine on any factory rim I have laying around, such as a '71 safety wheel from a "C" body, an early '70's "B" body rim, and even some later Dodge 1/2 ton pickup wheels. They also will fill "cop wheels". They do not of course fit any pre '67 "B" body wheels that I have here. Soon I'll finish up with a pic and a price if the original poster has interest still. (Sorry so slow). HTH, Lefty71 Personally I like what Randy has shown, especially if you have the vehicle that is right for them.

 

[fwi]

Is this what you are looking for?

View attachment 757270

What is the I.D. on those and how much would you want for them?(that's if the O.P. does not want these)

 

[fwi]

I have these that have no markings at all on them

 

[kiwigtx]

Do you mean like these ones @Victory .....



These caps fit the Wheels Vintique rims....and they are a great price. A little lighter and softer than MoPar caps, but I have had these ones on my A100 for about 9 years now, and no marks yet....been on & off quite a bit also.

https://www.classicindustries.com/shop/all-years/dodge/all-models/parts/?q=dog dish

 

[randys4406]

What is the I.D. on those and how much would you want for them?(that's if the O.P. does not want these)

These are 8-3/4"ID. Asking $120.00 for the set of four Ply. Div. Caps. I have a few different sets of the 9-3/4" ID caps also