LED tail lights... Gotta problem.

[BeepBeepRR]

Ok this is not a mopar question but an LED question.

I'm installing all new LED lights on this box truck. I get signals I get stop lights. But I get no signals when the headlights are on. A friend mentioned that you need an LED turn signal relay. Is that right?

 

[Lionized]

Ok this is not a mopar question but an LED question.

I'm installing all new LED lights on this box truck. I get signals I get stop lights. But I get no signals when the headlights are on. A friend mentioned that you need an LED turn signal relay. Is that right?

Worth a shot. Just ask for an electronic flasher. Two pin or three, whatever you need. They're cheap enough.

 

[BeepBeepRR]

Ahh so this...?

https://www.classicindustries.com/p...MIjOfe1KOx5QIVEFYMCh0_OQaLEAQYDCABEgKJPfD_BwE

 

[Lionized]

Ahh so this...?

https://www.classicindustries.com/p...MIjOfe1KOx5QIVEFYMCh0_OQaLEAQYDCABEgKJPfD_BwE

Your local parts place will have them. I'll also bet they're far less expensive. Should be no more than $5 and you also do not need the "polarity reverser".

 

[steve340]

You will need a special LED flasher unit. For my indicators to work correctly I had to fit a flasher unit that had an earth lead. Another thing I found out is LED bulbs are also polarity sensitive.

 

[Xp29h]

A friend mentioned that you need an LED turn signal relay. Is that right?

Yes, you should need led flashers. Also make sure each led light has its own ground.

 

[65-440]

Also called "no load " flasher

 

[BeepBeepRR]

Will update when I get it going. Thanks for the info.