If you want to comment on my prices or anything else just PM me. And at the same time, try reading the rules about "For Sale" ads for this site. You can read, can't you? BTW, if $6,000. is your definition of rich, maybe I should just GIVE YOU the parts.
Or, as an alternative, you could go find a good set of max wedge heads, have them ported, install new valves, springs, retainers, locks, get a fresh valve job & buy a new set of ARP head bolts. Buy a set of Comp Cams Magnum roller rockers and a couple of sets of Trick-Flow pushrods.
Then find a factory crossram manifold in good condition, have it ported to match, buy the linkage assembly, screw plugs, return spring brackets, hold down bolts, 2 new Edelbrock 500 cfm carburetors, spacers & studs. Next, buy 2 Edelbrock calibration kits and build a Uni-syn tuning tool. Then find 2 reproduction air cleaners. Add some extra air filters and spare 4 bolt valve cover gaskets. Oh, make sure you media blast all the parts that need it and paint everything so it looks great.
When you've assembled all of the above, add up what you spent, in dollars, not time. Place an ad for 40-50% of that and have some yahoo tell you you have mediocre parts and are trying to get rich...some days it doesn't pay to get out of bed.