Holley sniper

[Glew]

Hi, is anyone running a Holley sniper on a stroker with a fairly big cam? I have a 470 solid stroker motor and need a new carb. I heard they don't really work so sell on certain motors

 

[andyf]

I've been running a Sniper on my Coronet for a few years. Engine makes a little over 600 hp with a modest hyd roller. The Sniper works great if you know how to tune it. Can't be afraid of a computer if you want to get the most out of a Sniper. Here is a video of me on the chassis dyno with the Coronet. This is a 512 inch low deck with ported Edelbrock heads, Performer RPM, HP exhaust manifolds and a Sniper. If you listen you can hear it pull hard in 5th gear.

 

[451Mopar]

I'm not sure on the Sniper, but the Fi Tech works fine on my Charger, that only has about 5" of vacuum (270+ duration @ 0.050", 0.726" lift cam)

 

[biomedtechguy]

you can hear it pull hard in 5th gear.

Wow! How many MPH was that!

 

[kiwigtx]

No.


Smallblock 408 ....BPE website down right now, but it's not a huge cam.

 

[andyf]

Wow! How many MPH was that!

I think it was 155 to 160 mph. We were pulling past 6500 rpm and the car had 3.55 gears with 28 inch rear tire.