FOUND 70 383 valve covers

[Charles Cook]

Must be 70 model because 69 and 71 are different. Everyone that carries new ones are out of stock.

 

[Sahara]

I have a set that came off of a ‘70 Cuda Gran Coupe 383. Not perfect but not bad.

 

[Charles Cook]

Can you post some photos? Thanks

 

[Sahara]

Just defrosting them now because they were outside and I live in the arctic.I’ll post a few pix once they thaw.

 

[Charles Cook]

Lol it’s 25 degrees her in South Carolina. Burrrrrr

 

[Sahara]

Warmed up to minus seventeen here from the mid minus thirties a week ago.
These look better then they do in the pix. Surface rust only where the paint peeled.

 

[davek]

Charles do not buy AMD was not happy with them BUY original.

 

[davek]

Warmed up to minus seventeen here from the mid minus thirties a week ago.
These look better then they do in the pix. Surface rust only where the paint peeled.

View attachment 1046058 View attachment 1046059

those are not correct for bb,one should have 2 holes

 

[davek]

http://www.1970gtxregistry.com/1967-71valvecoverreference/1964-71 valve cover reference photos.html

 

[Charles Cook]

Thank’s Sahara sorry you had to dig them out of the snow and I appreciate it but I’m looking for the ones with the twist on oil filler cap. Thanks again buddy. Mine had the oil filler cap , pvc and a breather cap. Thanks again I’ll keep looking.

 

[Charles Cook]

Thanks Sahara they look like this

 

[Charles Cook]

Thanks daveK, spot on , 70 had there own model. Thanks guys !

 

[Charles Cook]

Charles do not buy AMD was not happy with them BUY original.

Hey Dave what was the issue with AMD ‘s

Charles do not buy AMD was not happy with them BUY original.

 

[Charles Cook]

Thanks Dave , AMD is one of the venders that is out of stock, l will look for used originals if I have to.

 

[davek]

Hey Dave what was the issue with AMD ‘s

I bought a set and the bolt holes were so far off I had to oblong the holes.It took me over 2 hrs to get them right. If I had to do it all over again I think I would buy originals. If that doesnt bother you Then go for it,no one will ever know.

 

[Charles Cook]

That will be my last resort, I’m going to see if I can locate some originals. Thanks

 

[Sahara]

Thank’s Sahara sorry you had to dig them out of the snow and I appreciate it but I’m looking for the ones with the twist on oil filler cap. Thanks again buddy. Mine had the oil filler cap , pvc and a breather cap. Thanks again I’ll keep looking.

No worries, I never looked at the block to see when the motor was made, all I know about them is that they came from a Gran Coupe that we parted out years ago.

 

[Charles Cook]

Thanks

 

[72 BLUE 400]

have this set

 

[Charles Cook]

They look straight, how much do you want for them ???