• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Cam Kit

69yenko162

Member
Local time
6:54 PM
Joined
Mar 5, 2018
Messages
20
Reaction score
0
Location
woodstock
What roller cam kit would be best to put in a 440-6pk 4sp car? At least a 700 lift. A real pop corn popper.
 
going over to much with cam for a vacuum operated carbs you better be good at tuning them.
 
Last edited:
So if 700 lift would be a problem with vacuum How much lift can I go without a issue?
 
What roller cam kit would be best to put in a 440-6pk 4sp car? At least a 700 lift. A real pop corn popper.
Have you listed the combo of the engine and car somewhere on the site? Ran in the 10's with a 660 lift roller 35+ years ago.....
 
My 1st roller was a .720/276 Comp, a dog, Comp re-ground it to .660/280, about equal to my mushroom cam, next was a .690/284 Lunati, only slightly faster than the mushroom. Call the top manufacturers to give them the motor & car details.
 
So if 700 lift would be a problem with vacuum How much lift can I go without a issue?


there are many factors that make a car to be what you want . so what do you want to do ?
street or strip j m o a race car is not good on the street and a street car is for cruising and enjoy the ride. what do you want i have been there and done that.
 
Auto Transport Service
Back
Top