FOR SALE Parted 71-4 Plymouths

[edp]

hi, looking for a door lock cylinder to latch rod , drivers side for my 71 Plymouth B body-either of those cars have one?
Thanks , Evan

35 year collection of parts mostly 71-4 Plymouths... Looking to down size stuff I will never need as I have almost everything I need for my cars. Not interested in shipping large parts. If you need something that is easily shipped and packaged let me know...

View attachment 1063019

 

[QuickBpBp]

hi, looking for a door lock cylinder to latch rod , drivers side for my 71 Plymouth B body-either of those cars have one?
Thanks , Evan

I do have that rod but won't be able to get it till later in the week..

 

[charger chris]

Do you have 1972 rr rear tail light harness?

 

[QuickBpBp]

Do you have 1972 rr rear tail light harness?

The one that runs along inside the body? Or the 2 harness's that attach to the plastic Tail light housings RH and LH?

 

[charger chris]

The one that runs along inside the body? Or the 2 harness's that attach to the plastic Tail light housings RH and LH?

The two that attach to the plastic tail housings

 

[QuickBpBp]

The two that attach to the plastic tail housings

I probably only have have whole housings not just the wires...

 

[charger chris]

I probably only have have whole housings not just the wires...

How much for whole housings

 

[charger chris]

How much for whole housings

And looking for a Complete set of seatbelts for bucket seat front and back

 

[QuickBpBp]

How much for whole housings

Let me see what I have as far as condition as that is what it would be based on.. May take a week as I am not goin to storage for a week or so..

 

[QuickBpBp]

And looking for a Complete set of seatbelts for bucket seat front and back

No seat belts for sale..

 

[67Charger]

how about a piece of the firewall with the throttle cable cutout in it? I need maybe a 3" square piece for the square throttle cables. It'll end up on an e-body, but all my attempts to make a patch with the cutout by hand have failed.

 

[QuickBpBp]

how about a piece of the firewall with the throttle cable cutout in it? I need maybe a 3" square piece for the square throttle cables. It'll end up on an e-body, but all my attempts to make a patch with the cutout by hand have failed.

Nothing on my end as I only have complete firewalls..

 

[Bill M]

Nothing on my end as I only have complete firewalls..

how much for a complete firewall

 

[charger chris]

Let me see what I have as far as condition as that is what it would be based on.. May take a week as I am not goin to storage for a week or so..

Any word on this?

 

[QuickBpBp]

Any word on this?

Yes Sending PM..

 

[QuickBpBp]

how much for a complete firewall

I would sell the whole stripped carcus '72 Charger with 8 3/4 rear drum to drum with non a/c fire wall $600

 

[Builderguy]

Looking for 73/74 Roadrunner/Satellite wheel arch molding/trim. Any of those in your parts collection?

 

[QuickBpBp]

Nothing loose that I can think of and seeing the prices of those I wish 20 years ago I did not sell the nos ones I had for $75 each...

 

[Sedanman]

Any rear sway bar to spring plates for 71-2? Non vinyl top drip rail trim for 71-2?

 

[Sedanman]

I have BB mounts and 340/360 mounts but nothing for conversion...

How much for the 340/360 mounts for 72 and older?