• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Eddy RPM heads with stock manifolds

erickson

FBBO Gold Member
FBBO Gold Member
Local time
4:52 PM
Joined
Feb 7, 2011
Messages
333
Reaction score
661
Location
west salem wi.
Can stock exhaust manifolds be used with Eddy RPM heads? Big block? Thanks
 
Can be? Yes... I'm assuming you mean HP manifolds, if so the angle plugs put the plug wires very close to the manifold on cylinders 6 & 8..
 
Can be? Yes... I'm assuming you mean HP manifolds, if so the angle plugs put the plug wires very close to the manifold on cylinders 6 & 8..

Agree ⬆️

It would melt the spark plug boots pretty easily on mine when I had that combo, if you’re not careful. Get those insulating socks. Or tti headers
 
Why would you use stock manifolds with aftermarket aluminum heads ?
 
Agree ⬆️

It would melt the spark plug boots pretty easily on mine when I had that combo, if you’re not careful. Get those insulating socks. Or tti headers
You can get shorty spark plugs as well
 
With the long reaching threads?
arghh, you got me there, I was thinking of iron heads.
But I'm sure the other ones could be tracked down.
 
Auto Transport Service
Back
Top