• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Superbird A-pillar covers

Hemirunner

Well-Known Member
Local time
8:36 AM
Joined
Jul 12, 2011
Messages
5,579
Reaction score
7,323
Location
Down South
I have a pair of Superbird A-pillar covers that do not have the holes in them. Can someone provide the spacing for these holes so I can drill the covers and the pillars? It also appears that the screw is a phillips trim screw with a somewhat rounded head and the covers are dimpled for them. If someone has pictures of that as well or can at least confirm it, I’d greatly appreciate it, thanks!
 
You have 1969 Dodge Daytona A pillar covers. I’d advise not drilling holes in them.
 
I took mine off before loading my car for the body/paint shop. Give me a bit...
 
From the bottom end. 5 7/16 and 17". I won't comment on the Phillips screws as I've never confirmed mine are correct. Yes the holes are dimpled for oval head screws.

20221222_131121.jpg
20221222_131158.jpg
20221222_131215.jpg
20221222_131219.jpg
20221222_132035.jpg
 
Last edited:
Auto Transport Service
Back
Top