WTB 70 b body sway bar to k-frame brackets/channels.

[Tony Tee]

Or measurements so I can fabricate a pair.
A dimensioned picture or a sketch will be great.
Thanks, Tony.Tee.

 

[Jerry Hall]

I think I have a pair.

 

[s/w theo]

I have an original set from a 70 Road Runner. I will send pics or get measurements if interested or I'll take $45 shipped to you.

 

[70gtx440dana]

I also have a pair if the set from S/W Theo does not work out for you. Message me for details. Joe

 

[s/w theo]

Here is what I have. Looks like you can fab these up pretty easy if they don't need to be original.

 

[Tony Tee]

I have an original set from a 70 Road Runner. I will send pics or get measurements if interested or I'll take $45 shipped.

Here is what I have. Looks like you can fab these up pretty easy if they don't need to be original.

View attachment 1417587

View attachment 1417588

View attachment 1417589

View attachment 1417590Thanks! S/W Theo, They look like 8" long . But is the width about 1-3/4" wide? And the steel is about 1/8" thick?

 

[Tony Tee]

This might be a duplicate reply due to my first reply just seem to vanish??
So 8" long and is it 1-3/4" wide? And is the steel about 1/8" thick? Thanks, sincerely Tony.

 

[s/w theo]

Yes, that seems about right. As long as it's good sturdy steel plate, you can make these real easy.

 

[Tony Tee]

Thanks!

 

[s/w theo]

Happy to help you out Tony.