Random picture thread

[68gtxman]

Ya, 30 friggin years late and 28,000 sq feet of it! Can't do 8 days of raking stone back off the lawn anymore each Spring....

We did about a quarter mile for the second time about 8 years ago. It lasted a good 25 years the first time and well worth the cost.

 

[66ChargerHI-PO]

Went to a nice little show in town at the fairgrounds today with the ‘67 Coronet, there was a 2nd Coronet 500 too besides ours and a ‘67 Coronet R/T so 3 Coronets in total which is unusual besides in Carlisle where theres always a bunch….

 

[70rrclone]

.

 

[dadsbee]

.

View attachment 1861605

Must be for a Slant 6....

 

[70rrclone]

Exhaust valve from a trick flow 240

 

[bm02tj]

Why did it get kissed

 

[70rrclone]

I didn't use locktite on the single bolt cam. It backed out. Luckily at a stoplight. My torque wrenches have been sent out for cal. Just to be sure.

 

[junior340]

Went to a nice little show in town at the fairgrounds today with the ‘67 Coronet, there was a 2nd Coronet 500 too besides ours and a ‘67 Coronet R/T so 3 Coronets in total which is unusual besides in Carlisle where theres always a bunch….

View attachment 1861550








View attachment 1861555








View attachment 1861560









View attachment 1861572

That is unusual. I kinda like being the lone 67 out here. But every once in a while I would like what you experienced. The only other 2 I knew about here were flipper guys so weren't interested in talking unless I was a buyer. That's ok.

 

[Dipstick]

View attachment 1861558View attachment 1861559
We did about a quarter mile for the second time about 8 years ago. It lasted a good 25 years the first time and well worth the cost.

Nice runway, nice hangar.

 

[DeltaV]

Champion

 

[Dave6T4]

View attachment 1861716

Quality Control at its best!

 

[dadsbee]

Press fit model...

 

[Charles Cook]

View attachment 1861716

You should start a thread on that

 

[70rrclone]

 

[DeltaV]

Thread 'Moog K772 Upper Ball Joints - Better Check Before Installing' Moog K772 Upper Ball Joints - Better Check Before Installing

 

[DeltaV]

 

[DeltaV]

 

[DeltaV]

 

[Billccm]

View attachment 1861731

Thread 'Moog K772 Upper Ball Joints - Better Check Before Installing' Moog K772 Upper Ball Joints - Better Check Before Installing

Question: Is this too much or too little Chinesium?

 

[Black_Sheep]

View attachment 1861716

Champion

I got a whole set like that back in the 80’s, it was the last time I ever bought Champion plugs…