What rims are these and what center caps do they take

[chargers777]

Center bore outside is 3 inches. Inside is 2.75inches making it hub centric for Mopar. What caps can I use? Can't find any push on that fit a 3 inch bore. What brand of rim are these? No markings on back of rim.disregard center caps in pic. They won't fit over the hub of the car.

 

[davek]

Summit Racing will have them.

 

[coloradodave]

Deflate one tire. A lot of times the manufacturer's name is cast into the barrel of the rim.

 

[chargers777]

Summit doesn't have any

 

[1 Wild R/T]

Western Hurricane..

Photo of one of my early cars that wore Hurricanes..... Around 76...

And...

 

[4mulas]

I think it’s a western wheel as well, and I believe they use a push in style cap much like a centerline c70 or c20 cap

 

[1 Wild R/T]

Yes, push in cap...

 

[chargers777]

I think it’s a western wheel as well, and I believe they use a push in style cap much like a centerline c70 or c20 cap

C70 is 3.18 inches. Wonder if that would work on the 3 inch bore hole?

 

[1 Wild R/T]

C70 is 3.18 inches. Wonder if that would work on the 3 inch bore hole?

Is is a true 3" or slightly O/S? 3.18 is 3/16 over which is a fairly significant amount...

 

[chargers777]

Is is a true 3" or slightly O/S? 3.18 is 3/16 over which is a fairly significant amount...

I'll check again. I believe it was right on 3 inches

 

[Black_Sheep]

Perhaps you could use something like this...

 

[33 IMP]

3" chrome freeze plug?

Seriously, Google 3" mag wheel center caps. You need push-in from the front caps.

 

[4mulas]

C70 is 3.18 inches. Wonder if that would work on the 3 inch bore hole?

Probably not

 

[chargers777]

Found some that are 3.11. May have to try them. I can't find any 3 inches.

 

[1 Wild R/T]

Know anybody with a Bridgeport?

 

[moparx]

i believe it was mentioned the center bore was 2.750. is that the wheel center bore or the cap center bore ?
regardless, it's no wonder the combination won't fit over the hub, because that is a ford register size.
the mopar register size is 2.810.

 

[chargers777]

It fits over the hub