FOR SALE 65 Satellite for Sale

[gto64gto]

I have my 65 Satellite for sale. I have had it a long time and got it in Benton, AK. It was in Mopar B Gallery 4-27-02 and 10-31-09. It has a 440 and 727 and sure grip. I have done a lot to it since it was in the gallery. Outside chrome is great. It has a Ididit tilt steering, non power disc brakes. I have added weld in frame connectors. The front end has been completely rebuilt and it has front and rear sway bars. It has Firm Feel tubular upper control arms and rebuilt power steering box by them. Also has an aluminum radiator. I have never found any rust on this car. It has new Legendary black interior(seats and panels). Good padded dash. Dash has been re-chromed. New wiring harness from rear seat back. New painless fuse box with wiring modification that has alternator going to battery and not amp gauge. Headliner is perfect. Interior looks new. Stock AM radio is disconnected and has aftermarket AM FM radio and. Amp gauge and oil pressure gauge does not work. It has large Auto Meter oil, amp, and water temp gauge. I would say paint is a 6 or 7. Auto console is great with good lid. I know I'm leaving out something but this is what I remember. I'm 78 and haven't driven it probable in 2 years. It stays locked up in my shop. My knees are shot and I've had a heart attack and just am unable to keep it up. It's way too nice to not drive it and show it. I had a 65 Belvedere 11 when I was in school. I have a notebook on my car with what I've done to it and a lot of information on it. I'm sorry for the picture quality but had to get my grandson to help me with this. I want $30,000 for my car. I really don't have to sell it but it's to nice not to be driven and appreciated I'm in NC. Thanks for your time.

 

[RR Fan Dan]

Does it have a fender tag? What’s been done to the motor?

 

[gto64gto]

Does it have a fender tag? What’s been done to the motor?

Yes. As best as I remember, it was built by man who was shown on 1st gallery. Tried to contact him when I 1st got it. Members who knew him said he had passed away but was a good wrench. It was raced and not very streetable. It didn't want to smooth out until after 3000 RPM. Oil pan was leaking and I wanted to change to a smaller cam so I pulled engine to fix it as I didn't know what pistons and compression was and I needed to know before I changed cams. As best as I remember, 6 pack rods, flat top pistons, and heads have been worked. it has a Edelbrock 750 carb and performer rpm intake, as well as electronic ignition. Car is much more driveable now. I have more information in my notebook but that's about all from the top of my head.

 

[Rev. Mopar]

Yes. As best as I remember, it was built by man who was shown on 1st gallery. Tried to contact him when I 1st got it. Members who knew him said he had passed away but was a good wrench. It was raced and not very streetable. It didn't want to smooth out until after 3000 RPM. Oil pan was leaking and I wanted to change to a smaller cam so I pulled engine to fix it as I didn't know what pistons and compression was and I needed to know before I changed cams. As best as I remember, 6 pack rods, flat top pistons, and heads have been worked. it has a Edelbrock 750 carb and performer rpm intake, as well as electronic ignition. Car is much more driveable now. I have more information in my notebook but that's about all from the top of my head.

am interested in the Satellite and have PM'd you directly. Been looking for one for at least the last 15 years. Will it still start and will it drive?