70 charger splash shield help please, need some pics

[davek]

I could use a couple pics of how it bolts to the front of the fender,not next to the doors. Yes I have the shop manual and just dont see it. Thanks for any help. Dave Sorry about pic @DeltaV / @kiwigtx can you fix my picture?

 

[DeltaV]

I could use a couple pics of how it bolts to the front of the fender,not next to the doors. Yes I have the shop manual and just dont see it. Thanks for any help. Dave Sorry about pic @DeltaV / @kiwigtx can you fix my picture?

View attachment 1913148

 

[davek]

pic of shield on the left side.

 

[DeltaV]

Your request came too late in the day for me to help you tonight. I won't be home tomorrow until sometime in the afternoon.

 

[kiwigtx]

pic of shield on the left side.

View attachment 1913166

Fixed it.

 

[Charles Cook]

 

[kiwigtx]

View attachment 1913334

I see what you did there.

 

[eldubb440]

believe it or not, I've never worked on a Charger........

bunch of tightwads lol

 

[kiwigtx]

believe it or not, I've never worked on a Charger........

bunch of tightwads lol

The Charger guys have all the money.

 

[eldubb440]

The Charger guys have all the money.

how do you think they got so rich?

 

[DeltaV]

pic of shield on the left side.

View attachment 1913166

Please clarify which shield or shields.

 

[davek]

A or B Wayne. pick one

Please clarify which shield or shields.

View attachment 1913775

 

[moparsaver]

Fender to valance splash shields. 2 bolts to the fender, 2 bolts to the valance.

 

[DeltaV]

Left front wheel well. Looking forward.

Four (4) attaching bolts circled in YELLOW:

Five (5) push clips through the rubber seal and splash shield circled in RED.
Note: There is an upper rubber seal too and its lower edge slightly overlaps the rubber seal and upper push clip for the splash shield.

 

[DeltaV]

The upper rubber seal is outlined in BLUE:

Closeup of upper seal overlapping the lower one.

 

[DeltaV]

Right front wheel well. Looking forward.

My splash shields and seals have already been removed.

Two speed nuts (whatever they're called) are visible for splash shield attachment to the valance panel. The upper two holes have a square-bodied nut, either pushed in or welded to the sheet metal.

Each upper hole has this type of "nut".

Close-up of upper nut taken from inside of wheel well:

The upper rubber seal I showed for the left wheel well (prior post) is covered with undercoating. Below is a picture of the right wheel well without the upper rubber seal installed. There are eight (8) holes for mounting the upper seal.