WTB 1964 Polara - Tail light Bezels and Body Trim

[Charlie Brown]

After a rear end collision, I am in need of left and right tail light bezels and / or complete assemblies. They need to be in very good to excellent / NOS condition.
Also need passenger side top quarter panel stainless moulding as shown in photo.
Any leads to the above would be greatly apprerciated.

 

[Dave6T4]

Sorry to hear about your recent bad luck. Those rear tail light assemblies will be hard to find. You could try Bill at Special T's, near Chicago. He usually has some nice chrome bits for sale. If he has something, it will be $$$. I bought a pair of stainless ribbed inlays that cover the badly pitted areas of those bases from him. Jim Kramer was reproducing the individual light bezels at one time.

 

[440 4 speed]

Might be able to help. I have the same 4 door as Dave. No engine or trans, PM me if interested.

 

[toolmanmike]

I will see what my extra parts look like. It will be a week before I can get to them though.

 

[Charlie Brown]

Thanks for this. Appreciate it. I can PM you with additional contact info if needed.

 

[Jeff Peterson]

This rh side sure looks nice

1964 Dodge Polara 500 Taillight Lens Housing Bezel Right NICE!! Park Brake | eBay

 

[Charlie Brown]

This rh side sure looks nice

1964 Dodge Polara 500 Taillight Lens Housing Bezel Right NICE!! Park Brake | eBay
View attachment 1920069

I saw this - he's on my list to contact. Thanks.

 

[toolmanmike]

After a rear end collision, I am in need of left and right tail light bezels and / or complete assemblies. They need to be in very good to excellent / NOS condition.
Also need passenger side top quarter panel stainless moulding as shown in photo.
Any leads to the above would be greatly apprerciated. View attachment 1919071View attachment 1919072

Charley, I'm afraid I won't be much help. My parts are driver quality at best. The right tail panel has a hole rotted in it and the outboard light socket hole is badly corroded. The bezels are driver quality and are pitted on the bottom surfaces and the lenses are faded and cracked.

 

[dadsbee]

Not sure if my 440 uses identical rings. Won't be home for at least 10 days to check if any I took off are in nice shape. I replaced all of mine with repros from Van's Auto.

 

[toolmanmike]

Not sure if my 440 uses identical rings. Won't be home for at least 10 days to check if any I took off are in nice shape. I replaced all of mine with repros from Van's Auto.

Van's. Probably where I will go. I noticed my lenses aren't in good shape and new lenses will sure make the lights brighter (and some white paint) LOL

 

[Charlie Brown]

Charley, I'm afraid I won't be much help. My parts are driver quality at best. The right tail panel has a hole rotted in it and the outboard light socket hole is badly corroded. The bezels are driver quality and are pitted on the bottom surfaces and the lenses are faded and cracked.

View attachment 1922605

View attachment 1922606

View attachment 1922607

View attachment 1922608

View attachment 1922609

View attachment 1922610

View attachment 1922611

View attachment 1922612

Thanks for the reply. The lenses are pretty easy to source. The rings and main bezel however, are a challange. I went to the Vans website to see about the rings, but they are not listed anymore. If I come to a complete dead end, I'll send you a note. Appreciate this.
Charlie

 

[Dave6T4]

Not sure if my 440 uses identical rings. Won't be home for at least 10 days to check if any I took off are in nice shape. I replaced all of mine with repros from Van's Auto.

I think your outside ones would be curved, but the inside ones would be straight.