This must be a mistake...

[Krooser]

Look what is on the lift!!!!

After a couple years waiting it's turn it is safely inside and getting some well deserved attention.

On the agenda this weekend is doing some brake repair, swapping exhaust manifolds and, maybe, installing the clutch and flywheel.

I will have to see how much oomph this old man has left!

 

[64Orange]

Lookin' good! Don't give up!

 

[Dan64]

Inch by inch it's a cinch, yard by yard it's hard. You'll get it going.

 

[PlymCrazy]

Yeah buddy, go get after it

 

[icetech]

One bite at a time And i like that car.. cool color

 

[Krooser]

Well the brakes will have to wait on some parts... on to the exhaust manifolds.

 

[icetech]

Well the brakes will have to wait on some parts... on to the exhaust manifolds.

View attachment 1927050

You should make up a big tub of the fake evaporust... it's super cheap and would clean those parts up nice..

 

[chargervert]

"This must be a mistake.....did you say steak!" I got as far as putting the car up on the lift,then drank beer while assessing the problem!

 

[Richard Cranium]

What lake was the car sitting in for all these years?

 

[chargervert]

Me and Sam are still deciding how to go about changing the front transmission seal on the Chargervert. It may take a few more consulting sessions before any action begins!

 

[oldbee]

Liquid consultations are always a welcome pastime.

 

[Krooser]

You should make up a big tub of the fake evaporust... it's super cheap and would clean those parts up nice..

I usually make up a batch of molasses for derusting parts... but, on this deal, the backing plates will get some attention from a wire brush and some paint.