What Part/s Did You Buy Today for Your Hobby or Project ???

[toolmanmike]

i bought this its my winter project to replace my newly built mega block wedge ...

View attachment 1936896

View attachment 1936897

View attachment 1936898

Dang, you need a more solid engine stand.

 

[#41]

There are tons of wildlife around here, so I'm starting a new hobby: I bought a solar trailcam that will wirelessly send data to my phone. I think it's gonna be interesting.

 

[ckessel]

Dang, you need a more solid engine stand

Like this?

 

[DeltaV]

These were delivered today. It's time for "musical chairs" in the garage.

 

[ckessel]

Got some goodies for the wagon. Semi metallic shoes, wheel cylinders[ supposed to help out with the spongy pedal after DB conversion], pins and a yoke holding tool. These came from E-Booger.
Also received the first of the parts ordered for the 72 Challenger I'm working on. Sway Away torsion bars and RCD valved Bilsteins. These came from BAC.

 

[stage3]

Dang, you need a more solid engine stand.

your right. air/hydraulic lift and gear driven stand rated at 1500 lbs.

 

[thehemikid]

Nearly wiped me out financially,...=)

 

[Dutchrebuild]

Another load of stuff, mabby I'll use some of it, eventually

 

[toolmanmike]

Nearly wiped me out financially,...=)

View attachment 1950922

The little things are fun too.

 

[Richard Cranium]

your right. air/hydraulic lift and gear driven stand rated at 1500 lbs.

View attachment 1949544

View attachment 1949545

View attachment 1949546

160 bucks on Amazon…. Not bad!

 

[chargervert]

This $1349.00 quick time bellhousing for my Hemi!

 

[mmissile]

Figuring out what parts to purchase, for the new rotator in Krusty. Block goes out tomorrow, for repairs. I'm gonna have to purchase a bunch of engine parts in the upcoming
months. It didn't really have much go unscathed. Live and learn...and go broke.

 

[PROSTOCKTOM]

Finally, after years of my round bar stock propped up in every corner and along the walls always falling over I go a rack for them.

Not wanting to scratch and beat the powder coating off I added a piece of high density polypropylene to the bottom.

Having organized raw materials for the lathe is just so much better now.

Tom

 

[Daves69]

Getting colder so naturally I need a new one..........