• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by 65AFX

  1. 6

    Do I want this coronet?

    I bought a 65 Coronet that looked just like the front end of this car. I thought it was an easy repair. Just replace bumper grill and lower radiator support. After digging into it found: Both front frame rails bent inward. Was able to pull out side out. The other side I had to replace the...
  2. 6

    WTB 65 Dodge Coronet right side spindle for Drum brakes

    Still looking. I think 1-1/2 is a little excessive. That what I have on one of mine.
  3. 6

    WTB 65 Dodge Coronet right side spindle for Drum brakes

    jimbosride, Looks like some wear on the inboard bearing area. Also a grove in the seal area. What does the other one look like.
  4. 6

    WTB 65 Dodge Coronet right side spindle for Drum brakes

    I only need one. Can you post better phot0s of the bearing and seal areas.
  5. 6

    WTB 65 Dodge Coronet right side spindle for Drum brakes

    Yes, it is the same. must be for drum brakes. It has a 1.250" inner bearing. Must have no rust on the spindle shaft and good bearing and seal surfaces. PM sent
  6. 6

    WTB 65 Dodge Coronet right side spindle for Drum brakes

    Jerry, No hurry, just want a good one. I already have a bad one. Enjoy the Holiday weekend
  7. 6

    WTB 65 Dodge Coronet right side spindle for Drum brakes

    I need one with no rust on the spindle shaft.
  8. 6

    WTB 65 Dodge Coronet right side spindle for Drum brakes

    Need one good spindle for 65 B-Body -Dodge Coronet- for 10" drum brakes. Spindle shaft must be in good condition with no rust or wear and not from a wrecked car. Rust on the upright is ok. I believe left fronts are the same. Also some later years are the same.
  9. 6

    572 Hemi pushrods rubbing Cometic head gasket

    Found all the exhaust pushrod rubbing severely on the head gasket. Got deep wear spots in less than 100 miles driving. I can replace the pushrod, install new head gaskets but will end up the same. How do I clearance the holes in the head gasket without wrecking them? Is this normal?
  10. 6

    Got My New Race Car From Detroit

    Guys, I was in the "TWILIGHT ZOON" Last week. !!!
  11. 6

    Got My New Race Car From Detroit

    Got home a couple weeks ago after driving to the Amblewagon plant in Detroit to pick up my new 1965 Dodge Altered Wheelbase race car. As I got the last one they gave me the jigs for the front end modification. I noticed in the box they also had a jig for positioning the torsion bar anchors...
  12. 6

    Oil pan gasket - dry or RTV ?

    My sprint car engine builder uses Valco Aluminum Silicone on everything. There are no gaskets on a sprint car engine,(except head gaskets) its all assembled with Valco. Recently redid my big block oil pan with it.
  13. 6

    1965 Coronet Water temperature Sensor Part Number?

    khryslerkid, You are my Hero of the day!!! Just the info I needed. Many thanks.
Back
Top