Recent content by 66satellite505

Hi everybody , I have been using this site as a resource for many parts of my build.. I just bought a B Block from indy ,trick flow 240s and a 440 source 512 kit 10.6:1 . I am planning to use a hyd roller cam . im hoping for 675-700 horsepower for limited street use . Limited means 6 miles to...

I have to say I have read many mauals and tech books but i can't say enough positive things about how to build max performance MOPARS by Andy Finkbeiner . !!! Top notch read. Thanks for telling me

Are you joking me I was just reading chapter 18 this morning !!!! That's like a Bible of knowledge

What type of rpm range is your power at . I mean what is your redline do you have ? every book I read and website I read tells different information I've always heard a 500 or similar size motor would choke out with 240tfs at high-end? What cfm carb and type is on your Coronet? Compression ? I'm...

I am going to call Duane tommorow just to touch base after the labor day holiday . Like you said, I need to set up a plan . If I could get to the 600hp range using my block crank and rods for $8000 I would be extremely happy . I guess I am wondering if that price sounds reasonable for my...

that's what I will do .thanks very much .

Torqeflight 727 w 2800 stall?

I have stainless headers . And 2 1/2 duel w x pipe .. no that is power at the crank shaft .. and the heads are.095 milled .. I feel the car is peppy but far from what I would like to achieve.. that's why I was curious if I could just buy a hone drop in new pistons and rings ,put new gaskets on...

I think this is how I'm going to go. Any idea who has the best prices ?

And again thank you for your advice I really appreciate all of the good info

The car is complete with the motor in it . But I am planning to start purchasing parts within the month and i was going to pull the motor. If I can just do a top-end switch I could probably keep it in the car and save the headache of removal

The build sheet said I currently have 9.5 cr with slightly milled 906 heads . I would guess the 270 trick flows would do the breathing trick and boost it too . I am not sure of the specs but they have to be a way better solution ...

Thank you very much . I appreciate that. That's exactly what I need. Someone with alot of experience.