Recent content by 69440yellow

Thank you for the replys,, I wonder where I can go in the northern area of Tampa to get help with parts to fix my problem.

I tried to tighten them up but they are already bottomed out. I agree it seems that they should at least have a large portion of the shoulder in the caliper.

I am experiencing some issues with my front end. There is a lot of play when wiggling the tire so going to replace wheel bearings. But my question is about the calipers. I have never seen bridge bolts like this. Is this normal.

Just to follow up, put driven hr1 15-50 in and still have very light rocker noise while cold. It is raining here so no trial drive today.

Please look at the pictures and tell me if the wear on these rocker arms is normal. These came of a 318 hydraulic lift motor. I took it off to look for cause of loud tappet noise. I found that if you push down on the push rod the lift will push down with a moderate push of the thumb. The spring...

Please look at the pictures and tell me if the wear on these rocker arms is normal. These came of a 318 hydraulic lift motor. I took it off to look for cause of loud tappet noise. I found that if you push down on the push rod the lift will push down with a moderate push of the thumb. The spring...

We're using r12 found compressor wasn't building pressure. Put rebuilt compressor and new components under hood. Found most of my problems were in the ac controls. Took them apart cleaned them up fix the fan switch. Refilled with 134 (UGH) not favorite but didn't have enough R12 if we ran into...

We're using r12 found compressor wasn't building pressure. Put rebuilt compressor and new components under hood. Found most of my problems were in the ac controls. Took them apart cleaned them up fix the fan switch. Refilled with 134 (UGH) not favorite but didn't have enough R12 if we ran into...

By the way I live in Springhill FL

Hope I'm doing this correctly, everyone knows all about being correct by now. I bought a 69 coronet 440 with a 318 mated to a 904a trans about three weeks ago. Was told a/c worked but needed freon,we all know there is no free in freon but I took his word. Let's see 1 compressor and all the...