Recent content by 71RR

Whats the size of the rear tires?

Bringing back old memories. Well, I see where my post of 2 1/2 years ago is getting hits again. Thanks, and yes I still drool too. Just finishing up putting a Brewers 833 kit in her, and wooo, theres something about a 4 speed. That white ball was really a nice update. Sad for some of you to...

Bigman, where should I look if I was interested in a set of 15X8 steel wheels. Thinking about a set of Hoosiers.

Meep, would I be expecting to find floats too low or too high. What about the needle size, might it play a part in low speed getaround?

Guys, just got my 4 speed in and got in a test run today for a short. I have the eddie 2x4 intake with 2 600 cfms on her. I have the rear one coming in first and she spitts and sputters pretty bad. Once the other carb comes in, everything is goooooood. Might run both together all the time or any...

I better sent measurement specs to Mcleod and make sure that I get the right one. Thanks for the heads up.

Rusty, you are taking this too serious, nothing that throwing money at it wont eventually solve. Been doing it for a long time now, and still married.

Yes, it is drilled and the pilot bushing Brewers sent will fit the hole. I just talked to Mcleods and they said that I have a real hemi crank. The block I know is a 426. They do offer a steel 8 bolt f wheel to solve my problem. But, if there are 2 8bolt patterns, and one is more bastard than the...

I have just found out that my crank shaft has 8 bolts in the rear flange. I am, or was, pulling out a 727 and putting in a Brewers 4 speed. Their flywheel, as with all others I am told, only have 6. Anyone know what the deal might be with the crank? Industrial engine, stroked freak motor, built...

I am needing everything for 64 Belvedere emergency brake. I have the pedal assembly in side the car but have nothing from there back. If you have the set up, or could tell me who sells the complete kit. Thanks.

Hey, I have decided to for-go the doe and put the white ball in the floor. Good with Brewers expertese and should be just putting one foot in front of the other till done. Is there anything to watch out for or something that might throw a curve in this adventure?I will be removing a 1965 push...

Thanks for the help guys, and the laughs, I found an exploded view from way back and the line to the kick down shaft called it a 'throttle shaft', dont know why, but went to ebay and one came up. Looks to be rubber but ordered anyway jst to chec k. Letcha know.

My parents werent born alive.

I just realized that a piece of valuable info might have been left our. I have a push button trans. Thats why I dont have a selector seal. Just the kick down seal. Didnt think about it.