Recent content by axxmann

Just an update to all. Completed the change over to power steering. Used the Borgeson. Their instructions leave a little to be desired, but all in all it went real well. I highly recommend this conversion. You cant not absolutely love it! Thanks all for your help and if anyone needs input from...

While I have the steering column out to add power steering I have decided to rebuild it. Again need all of your help. First we think the main shaft looks a little bent and is that normal? Next can I get a complete kit for rebuilding it? if so where is the best? Or is it best to buy a completed...

I have been getting a different vibration than the one I just dealt. It ended up being the driver side header rubbing on the driver side torsion bar. We forced the exhaust over and got more clearance and the vibration is gone. Good luck.

Update. Sorry it took so long . 1. I raised the the front end back up to 26" at the center of the top front fender wells. 2. I pulled the drive shaft just for inspection and decided to install a new U-joint even though the old one had very few miles on it. Thank god I did. 3. When my shop guy...

I recently adjusted my Torsion Bars to lower the front end. Whole car started vibrating at speed 60 and up. We re-balanced tires & wheels yesterday found that there might be a small amount of problem with the wheels seemed to balance out ok. Could me lowering the front end via torsion bars have...

I recently adjusted my Torsion Bars to lower the front end. Whole car started vibrating at speed 60 and up. We re balanced tires & wheels yesterday found that there might be a small amount of problem with the wheels seemed to balance out ok. Could me lowering the front end via torsion bars have...

Hello everyone hope your all well. I am looking for a picture of the shifter arms for a 69 Road Runner. Here is the hard part I would like to see them installed. Long story short when I took my Competition Plus off my RR I had to struggle with the arms. Now that I have had it rebuilt, just like...

Looks great inside.

I saw another thread about this but cant find it, sorry. My steering column from the fire wall to the steering box does not follow a straight line. Is this common or not. Please send some pics if possible. Thanks As Always. Also update after 8 months of fighting with Holley the replaced my carb...

This is a more of a public service announcement than a political statement that goes out to all the Classic and High Performance car owners. As you vote take a good look at who you vote for as far as the New Green Deal. If you have a large investment in your vehicle remember if it goes the way...

New less that 750 miles. Car starts right up and I see no fuel anywhere.

Have another one for all you gurus. I have a 750 Holly dual feed dual pumper with the little windows on the float bowls to make it possible to see the gas in the bowl. Any idea why they would go dry when the car sits over night? Thanks in advance as always. Axxmann

Still have a 2004 Commemorative with 9700 miles. Still has tits on the tires.

Thanks to all of you for your help all 500ci ran strong today.....Thanks again.. ohh and dadsbee that corvette was a 4 time show winner and I still have yet to write a song about it like my track My Babys Town from my second cd No Fancy Cover. Axxmann

Sorry yes I do have a diaphragm clutch. This type of forks.