Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Would be specifically looking for the red 440 super commando pie tin as well. I already have an orange. If we can’t make a deal on the breather I would also be interested in a red colored pie tin if you happened to have one. Thx in advance.
E
Thanks for your reply. CAP out of the right snorkel is factory OEM I believe, but I don’t require a CAP nipple. I will not be attaching any factory vacuum lines. My motor isn’t original. Thanks for your reply.
Good morning team, I am looking for a 1967 Plymouth GTX, dual snorkel air cleaner, with the red color super commando 440 pie tin. Ideally, the carburetor flange base would measure the 5 1/8 diameter as well. I have an aftermarket Holly double pumper. If you only have the red color super commando...
Hey team, I just installed a hotchkis TVS on my Belvey and the clearance between my fuel tank, rear sway bar, and 3rd member was within mm’s. So I flipped the rear sway bar upside down to alleviate all clearance issues. Can anyone see why this would be an issue? I attached photo of hotchkis’...
Yes, the 66 is shaped different and has a different accent line and location. Thanks for your reply. I have found many 66’s but no 67’s. I have even resorted to searching for the entire fender providing it has the trim, when I only need the trim, ha.
I need a 67 Belvedere II front passenger trim molding like the pic, but I need the passenger side. It mounts right along the top of the fender. Thanks in advance.