Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
As much as tearing out my current dash and putting in another with the original radio openings intact intrigues me, what about making new pieces and using metal epoxy glue to basically “glue” in the new pieces....THEN put my radio in. JB Weld & Gorilla Glue metal epoxy come to mind. Anyone...
I have a ‘64 Dodge Polara that has had an pioneer sound system, that previous owners installed by cutting out part of the dashboard which includes the original holes for the original radio. Now after recently buying an original radio....had the radio rebuilt with FM and all the new...
I have a ‘64 Dodge Polara that has had an pioneer sound system, that previous owners installed by cutting out part of the dashboard which includes the original holes for the original radio. Now after recently buying an original radio....had the radio rebuilt with FM and all the new...
Hey Guys..... Looking to replace my engine harness and bulkhead dash connectors for my 64 Polara. Was wondering which is the best place to get them. Note : I'm not looking for an entire wiring harness....I just want to replace the connectors themselves....I've been told the '64 is a one year...
1964 Dodge Polara 2-door hardtop. Built in Los Angeles, CA, originally delivered to Tom Roady Dodge, Gardena. Ca.
** Originally a 383, 4 speed manual and a former drag race car at Terminal Island, near Long Beach, CA.….(but not since the 90s, I bought the car in ’99, have never raced it)
**...
Great, Thanks....turns out there are two adjusting bolts on either side of the brackets...and once we loosened them and readjusted the seat....all was fine.
Hey guys....finally got around to getting front bench seat with arm rest reupholstered and now.....when I installed it.....it barely fit in and the seat wouldn't be back far enough to give me enough room to get in it! the front bench came from a 4 door and looks great!! Can upholstery...
I'm about to put my 64 Polara on the market....it needs a bit of restoration and am trying to put the mounting clips on the "Polara" part in the back and the thin moulding you mentioned. Where do you get those clips for the "thin moulding" you are looking for....or are the ones you have...
excellent 5.7 and Steve!! Thanks….FYI Steve….was your experience with the outside bumper bolts similar? or were you able to reach them in another fashion?
Was hoping this wouldn't be as crazy...since I was going to swap it for a newly chromed front (and rear which came out pretty easily). I see the plug....but its way up the line past a rubber grommit unless you mean unplug it at the turn signal housing itself...
Trying to remove a 64 Polara front bumper....having trouble with disconnecting turn signal housing so I can pull the bumper off. How does it disconnect from wiring?
and the side bolts holding bumper to brackets. There is no clean way to get to the bolts...and the bracket is connected to a...
Did you ever find the car you were looking for?? I am selling my 64 2 door after taking out the interior for a rebuild and repaint on the outside as well. I have bench seats and new upholstery (light blue with original logos) all ready to get put on…..need to order carpet….and side...