Recent content by Denis Arseneau

Looking for the clips for my moldings. Do anybody reproduce them or is there a different clip that could replace it

Same height.

Moved it to the switch plate just above Polara/Monaco spot. Still nothing. So after taking the motor apart several times, I noticed that the new switch cam was a little different from the old one. So I just took off the spring from the new switch cam and placed it on the old one which was...

Took the wiper motor off, took it apart and inspected it. Went step by step accordingly to the manual on reassembly. With the wiper motor in place, but not hooked up to the linkage arms, it parks as should with all three speeds working. But when I hook up the linkage arms, it doesn't park...

Clamped a ground directly to the switch and no results.

When I put the wiper switch off, it still keeps going.

Ok, hope to get some help on this LAST problem before I can bring it for the inspection and get it on the road after 3 years of working on it. 1973 Roadrunner, three speed wiper system, motor works, repaired wiper mechanism with a NOS plate & latch kit (spring inside was broken). Have a good...

Thank you. Just making sure before punching some holes in the door.

Need to drill holes for the passenger mirror and wondering if it's the same measurements as the driver side. Door was a donor from a Satellite with no mirrors

Thank you all for the great input. Will be gone tomorrow to set up our hunting camp with my brother in-law. Be back Saturday and tackle this. Will look again for the proper crank arm to motor.

Thanks for the input. So drive link #3431 647 58622 which connects to the motor is for a three speed set up. Would the drive link that connects both wipers at the pivot, #3431 663 58622, be the same for the two and three speed? Also, would the 72 Plymouth service manual wiper description of the...

I kind of think it's what your saying, not sure.

Hi folks. Just buttoning up the car for the safety and need help with the wiper motor linkage for my 73 Road Runner. It's a three speed and not sure if I have the proper linkages. Bought the car as a unfinished project, so I didn't take it apart and car came with several boxes of parts. Some not...

Just checked the box and I only have one sheet.

Thank you for the reply. That sounds about right.