Recent content by Dobaroy

Trying to identify this steering gear/box we have on hand. The part number is G-3643311, I can find part number G-3643333 which is close. Any idea where I can search to find out what this box is out of. Thanks

Thanks guys for all the replies. Think we are going to give the RTV a try. Will post a pic later. Have a good day!

The lens came loose from the taillight on our 76, luckily we didn't lose it. Cannot see what holds it in place besides glue. What would recommendations be for best glue for this project. Thanks

Thank you all for the suggestions. Good idea to put a dowel or pce of pipe in it so it won't collapse and also stainless steel great idea. Will let you know how we make out.

Working on a 440 motor and we need to remove the heater hose spigot. What would be the simplest and quickest way to do this? Thanks

Gracias my friend.

Thanks guys for the replies, good advice.

Have a couple of motors here and wondering about suggestions on how best to store for a year or so. Thanks

Thanks guys, will keep battering at it until it comes off.

Want to remove fan on our 1976 Cordoba (360 engine). Got the 4 bolts loose but not sure if the fan is attached to the spacer, it just won't budge. Thanks in advance for any suggestions.

Thanks guys for all the good replies, forgot about the ATF idea, thanks for the heads up. Won't get back to it now until the weekend but lots to think about.

Our '77 Cordoba with 400 motor has been sitting for about 5 years. We fired it up yesterday and the lifters at the front of the motor on both sides are noisy. We changed the oil and that did not make any difference. Thinking of swapping in new lifters but not sure if that will solve the...

Thanks guys, haven't had a chance to get to see it yet. Now we are dealing with snow up here in Ontario this morning.

Thanks guys for your suggestions, plan to go see it in the next couple of days. By the way it is not in the car now.

Thinking about buying a 400 motor for our '77 Cordoba, found one complete with transmission that has been sitting in storage for approx. 10 years. Will probably try turning it over by hand to see if there is any compression. Anything else I can try? Thanks