Recent content by Moparlike

Unfortunately I inherited 8” wheels for these, so I’m limited to taller, a little wider tired; 6” tread. There’s not many choices for bias, but these look a little taller than I had originally thought.

Hey! Can anyone please advise me if I can fit a 29” tall tire on the front of my 69 Road Runner? I have them, new Coker, and don’t wanna mount them it they’re too tall. I need a tall bias ply tire to run with my slicks, and my choices are limited... Thanks!!!

Hi! Is there a place where I can find a simple under the hood wiring diagram. Engine 440-6 wiring? Thanks !!!

Yes! Thanks!

Hey. The previous owner of my 69 Road Runner 440-6 mounted the MSD behind the rear seat. The battery location is in the trunk. It seems too far back.... should I move the 6AL forward, and what is the ideal location? Stay safe! Thanks!!!

Ugh. if I was only 20 years younger and 40 lbs lighter. lol But I’ll do it. Thanks!

Hey! I hope that everyone is safe! I have a 69 Road Runner.... it was originally an Ivy Green interior, and evidently painted black, with the green starting to show through. I’d like to paint (repaint) the dash pads black..... Is it a huge project to remove and replace the dash pads? Thanks!!!!

Edelbrock Performer ported heads. Thanks!

The 9” rearend is 3.54; I usually run a 2/1 mixture of 91 and 112 race gas, avg 98 octane. Thanks!

Hey. My new MSD Pro Billit 8546 distributor is arriving tomorrow. I’m looking for opinions regarding initial/total timing settings.... springs, bushings, spacers. My info: 69 RR 440-6 506 stroker motor 10.5 compression Cam is .600 lift/256 duration Manual transmission Thanks!!!

I’m looking to purchase this MSD 8546 distributor, however I’m nervous that it will even fit.... I have a 69 440 RR with Edelbrock Aluminum heads. Can anyone please let me know if this will fit, and how it works? Thanks!

Thanks gentlemen. I ended up grinding down the box-end wrench to fit in there. It worked perfectly. I’m adding a fuel regulator and changing out the lines; going with black fittings at the same time. Thanks!!

.... to remove these fittings? And do I need to remove the choke or center carb? Thanks!!

1969 Road Runner. 6bbl. I’ve added an electric fuel pump, and I’m going with 1/2” fuel lines. I’m attempting to mount a fuel regulator with a return line. Does anyone have a suggestion where to mount the regulator? And how/where to stuff all of these fuel lines? Thanks! Any photos would be...

Hey. Can anyone please tell me if this should be plugged, or left open? Thanks!!!