Recent content by pjrenusr

The wheel trim will need some work... Also have the rocker trim below the doors and behind the rear wheel opening... Any clips I have will be included ...I couldnt find a set when I got these and it seems they are hard to find... Also have the turn signal indicators that mount on the fenders...

Just installed a set of Hooker headers on my B body LA block.. The first attempt to line up the bolts through the headers and into the heads was miserable.. I had to ream out the holes in the headers to allow enough wiggle room to line the headers and the exhaust ports up... The inside bolts at...

I have scrapped my project and have left over trim. I have the complete wheel and rocker trim for a 66 Satellite two door hard top. The rocker trim is decent driver quality but you will need to work on the wheel trim molding. The left rear has a slit in it but I have been toldit is fixable. The...

1966 Belvedere I heat shield. Has some crcks but a good welder will fix easy. Untill I found this I didnt know why the battery tray was indexed in certain ares.

I thought I add this as last weekend I was in the land of far far away to get some wheel trim molding and while I was visiting this private oasis of mopar parts and cars the guy showed me some of his rare pieces and one that I wish I could use it a factory stock 318 with dual quad cast iron...

I am holding off the demise of the Satellite until I see what offerings are out there. I may not find a complete rust free body however I am going to see what comes up in the next few months. Here in Washington State it is real tough to get rid of a hulk without title even if it is all cut up.AS...

I couldnt wait to get going on my new project. Took apart the complete front end and powder coated the suspension and replaced all the parts with tech help from fellow members.Sanded and smoothed the engine bay and put on some new paint. Sent out all the fenders doors hood and other body parts...

Hey thanks for the input from both of you. As I have discovered the 360 Magnum uses regulated voltage from a module which is part of the fuel pump assembly to control fuel pressure to the injectors. And yes GM uses a fuel pressure regulator that operates off the vacuum of the motor. I figure if...

This is one I found on Craigs List Seattle. Its actually 55 mi south of Seattle. But this guy has a 66 that is for the most part a great parts car or fixer for 500.00.Go on Seattle Craigslist or like I use Craigslist Nationwide. Its missing console,rear seats and some trim and has a Belvedere II...

I am installing a 360 FI motor into a 66 B Body and wonder if anyone has info on fuel supply line and do I need a return line? The fuel rail has no return line on it or fuel regulator like some GM s I have owned. Was this done from the fuel tank or what ? I am installing a Holley fuel pump...

I will get some pics out soon . AS for the wiring harness I will need to get the car running to see for sure if I got it figured right. It seems simple but I am venturing into new territory and would be very unpopular if I gave the wrong info. Right now I am working on the dilemma on how to make...

Polywant a magnum Well I took advantage of the long Memorial weekend as mine started Friday. I took the harness apart unwrapped it all and went online and purchased a Mitchell guide for this engine. From there traced labeled and removed wires. The harness I got was from a 99 Van and the motor...

OK I know its corny! But I have been back and forth on deciding whether to put a late computer aided 360 magnum and a aod trans in my 66 satellite. Got one last weekend and now am in the middle of wires and more wires. Got some good feedback here and one suggestion was F.A.S.T. who specialize in...

So far no response but I will hold out hope or just go for it and as usual figure it out as I go. I think a lot of us have gotten our education this way so when a problem comes up we are able to figure it out some how. That is part of the fun for me. I just dont want a hacked project when I am...

Hey yea I agree I have the same info. But when it comes to proper hardware in the right places for a stock look assembly they fall short. I see up in my area there is a Mopar meet comming up so I will go camera ready to get some photos to answer some of my questions. I have redone GM and Ford...