Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After doing some more fault finding and then investing in a new pair of hood hinges the noise is gone.
So, yes worn out hood hinges can cause a "front end" rattle.
Appreciate the help that others here offered.
The thought had crossed my mind. However, the torsion bar didn't feel particularly loose. If I remember correctly it had to be helped in.
Also, my son says he could feel the knock on the bottom of the cowl panel - immediately above the evaporator / heater box. This would suggest not the torsion...
I have a 71 satellite and have been chasing a knock / rattle coming from the front. For a while I was convinced it was the front end. But everything has been replaced - the front end is tight.
The back if the bonnet (hood) seems to move around a bit and this is when the noise occurs. When the...
So, I think I am finally coming to the end of this journey.
Summit Racing really went all out to help me on this. However, the manufacturer has drawings that confirm the dimensions of the parts they supplied. Despite this Summit is refunding my money without question - I cannot complain about...
Here is a screen shot of what I have seen. However, digging a bit deeper the claims seem to be overstated. For example if you go to the Moog K8243A part number it then only talks about 1-1/8 degrees, which is really very much the same as the others. So sorry all, a false lead.
Just trying to achieve some reasonable positive caster. Have re-bushed and ball jointed all of front end before and left side has had trouble getting enough caster. However, I have had problems that I am now resolving with worn LCA pivot shafts. Also, I will thoroughly check the LCA and radius...
Yeah, I know there are the offset Moog bushes, but I have seen cam bolts advertised that offer 2-1/4 camber / caster adjustment. Not sure if this is actually possible through the cam bolts.
I see that some cam bolts sold offer 2-1/4 degree camber / caster adjustment.
Do they actually increase the range of adjustment available for camber and caster? Are they worth the trouble? Or just stick with the originals?
Unfortunately the manufacturer claims the supplied parts dimensions are to their drawings. Seeing their drawing they are.
Still does not explain why they are under size.
I am reaching out to PST (who is not the manufacturer in question) for some help. Hopefully they have the right sizes.
I have...
I agree with you regarding the tolerances - as an engineer it didn't make sense to me, but I wanted to make sure I wasn't missing something. The old saying of ask questions first before firing off.
For the life of me I cannot understand why it is so difficult to make aftermarket parts that fit...