Recent content by RS Mopars

sorry John hit wrong button [email protected]

I need one seat belt for a 69 b body in black for buckets the one with the extra buckle sewed on it for the shoulder harness to connect to

Hey guys 69 charger 440 I installed a new engine wiring harness fixed all bulk head connectors I was testing wiring with key in the On position the back of the regulator gets hot On the coils on the back side regulator is new wiring new it's points ignition right now but will be switched to...

Do they bypass the connection part all together? I thought about that mine never got hot and burned the tab broke off and pushed threw the bulk head I found a new one that will work but it's not brass

Hey guys I have a bad female connector in the bulk head for the wire that is hot to the alternator I have it out my question is the original looks like brass but can u use the lighter modern day connector or should find a brass one

I posted some pics let me no if you got them also the side piece was off on driver side

I measured from seat belt bolt center to back of console it was 1inch I got some pics for you to if I can figure out how to post them to you

i measured from seat belt bolt to back of console it was 1 inch I got some pics for u if I can figure out how to post them to u

Ok will get some measurements for u tomorrow I will be out there was going to today but got home late

If you want I can take some measurements tomorrow for you and some pics the only thing my seats are out right now

Any seat belts? For bucket

I just did my 69 charger was a original 4 speedconsole car it's hard to say from the pics but mine the console front looks to go up under the dash a bit more and as far as floor gaps the carpet kit and the extra side piece you can get will cover up that mine without the kit was about a inch or...

checked bulbs there right will check the ground out today I think that is my problem thanks