Recent content by RT Dreamin

I just sent you a private message, I’m interested

Thanks for the info, sounds like many have been saying the Street Dominator and the CH4B (which has also been mentioned). I’ll look into the Thunder AVS 800 or the 750 Holley mentioned. There is a Carter C1 4967 S on it now with a Performance RPM. I can’t seem to find anything about a 4967 to...

I have tried the search and surprisingly if I type “69 440 intake” in the search filed, it brings back vacuum lines or Vin decoding and a bunch of other stuff, thus the question. I’ll play with different combo’s and see if I have better luck.

Thanks, I’ll look into this one. Haven’t really thought of Holley (possible a carb, but not for intake).

I currently have a lowered air cleaner, hoping to find stock height or as close as I can so I can use the original double snorkel. Car is so original……

Thanks, I’ll look look at this one

I have a 69 charger R/T that has an Edelbrock Performer RPM intake (7196) and a Carter C1 4967 S carb on it that I would like to replace. I have a stock hood and the stock dual snorkel air cleaner that I would like to keep on it. Currently the intake is too tall for the stock hood and air...

The 14’s are stock. 215/75 in front and 235/70 in back. No mags, just OEM steels with Mopar hubcaps. I also plan to convert the front drums to disc once the snow flies this winter so wanted a little bigger wheel to accommodate the discs/calipers.

More so biggest that will fit without rubbing but i liked all the different thoughts that were listed. All very helpful.

I just want a good handling and safe tire that will fill in the well a little bit. The 14s with the tires that are on there seem lost in those wells. So nothing to big nor major, just a little more fill. I got these rims because it’s the style I like and they were 15s, which I felt was what i...

Pretty much what I’m looking for, good safe handling and better fill in the wells.

Thanks, I’m looking for a little more in the well, the current stock 14’s are lost in there especially with the tires that are on them. I want the functionality (handling, safe for the rim size, no rubbing in turns/bumps etc, stability) but a little more “fill” than what it is now

Looking for advice on tire sizes for my wheels. They are 15x7 with 4” backspace on the front and 15x8.5 with 5” back space on the back. Any suggestions for tire sizes that would fit best with no rubbing on the wheel wells? These are on a 69 charger that I’m swapping out the original 14” steels

Thanks for the info, I think I saw some kits that were the booster, master cylinder and the valves. I’ll take a closer look at that one.

Thanks! What about the proportioning valve (may have spelled that wrong)? And how can I tell if it has it (I presume it has it but I have to check)