• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Russtoy

  1. Russtoy

    Russtoy tick

    I cut a 3/8 pipe coupler, and it jams the pickup in place. The Teflon tale idead is great. I'll use that too. Thanks
  2. Russtoy

    Russtoy tick

    I finally found the tick. After I changed , the heads, rockers, rocker shafts, timing gears and chain cam and lifters. The beeping oil pick up tube was banging on the pan. I pulled the engine, thinking it might be a wrist pin. And found an edge on the pickup, was rough, and a hammered line on...
  3. Russtoy

    Engine cuts out

    You also do not need a ballast resistor.
  4. Russtoy

    Engine cuts out

    Well I fixed russtoy. I replaced the ignition system. Profirm makes a Chrysler licensed repop of the orange box and distributor. And I am using a plain black coil. Car has run great.
  5. Russtoy

    New member from MN

    Welcome, also in Minnesota, North central.
  6. Russtoy

    Should you just start out by buying what you've always wanted? Is it cheaper that way? 1964 B Body

    I like the journey too. You can build it the way you want. Hopefully it turns out the intended way. If not, try it again. Plus you get the ego boost, from all the nice car comments.
  7. Russtoy

    Engine cuts out

    I got russtoy running again. I put in all new proform, Chrysler licensed electronic ignition. No ballast resistor. The coil is designed to run on 12 volts. It does have the orange box. It's been good for a couple hundred miles.
  8. Russtoy

    Engine cuts out

    I by passed the internal wiring with jumper wire. So or wasn't back feeding.
  9. Russtoy

    Engine cuts out

    I'm having a similar issue. My 69 charger, with a 440 source 512 kit. Hei distributor and coil. It will run for about 20 minutes. Then shut off. Jumper wire from battery. Same thing. It will restart, and run for 3-5 minutes. Then it has to wait. I have replaced the coil 3 times. Distributor...
  10. Russtoy

    Front suspension specs

    Upper control arms are new, all bushings, ball joints are being changed. So it should be pretty much stock.
  11. Russtoy

    Front suspension specs

    Are your front tires close in size? I had yo bring it back, and have it adjusted. As they showed wear in just a few miles. I'll let the shop know. Thanks
  12. Russtoy

    Front suspension specs

    I am wondering if anyone has the specs for a 69 charger, with wide tires, 245/60/15. I had it done 18 years ago, and the guy who did the work has retired. I think he said it had to have a different setting on the camber, then stock. The shop I'm having do it this time doesn't know . Thanks.
  13. Russtoy

    Russtoy

    Here are some new pics
  14. Russtoy

    Russtoy

    Wow, I guess it has been a while since I was here last, like almost 3 years. So Russtoy is up and running, put about 6000 mile on, not sure how yet, U guess lots of trips to DQ. Tried a holley sniper. Didn't work out for me. left me stranded 2 times on the road. Towed home times. Not...
Back
Top