Recent content by SCATPACK1

Does anyone run E-85 in their street mopar? 1970 Challenger with high compression B block. Currently running mix of Av Gas and supreme. But if I am taking a road trip, I can't pack enough Av Gas for a long ride like Drag Week. How hard is it to find E-85 on the road? thanks

67 Super Stock style Coronets make such good looking race cars. Really like this one.

The parts I have are: New 4.375 stroke K1 Crank still in original box and in the original protective wrapping. Has chevy rod size and stock Chrysler Mains. 8 bolt flywheel flange. New K1 Carillo H beam Rods, new in the box. 7.10 length w .990 pin size Zeeker Aluminum Heads. Max wedge port...

Looked on the search engine and did not find anything. Does anyone know if it is possible to use the 1970 Bumpers from a GTX/RR/Satelite on a 1969 Dodge COronet? I like the 1969 Coronet bumpers, but I also like the 70 GTC lights in the bumpers. Anone know fo rsure? thanks

It is the axle code, that was the reason for my question. Is it possible to have the A-31 3.91 axle ratio with a 22" radiator?

Looked at a Road Runner a buddy bought recently. The car is a 69 RR, 383 & 4 speed car with 8.75 rear housing. One of the codes on the fender tag is A-31 (3.91 sure grip). But the car only has a 22" radiator opening. For some reason I thought when you got the track pack A-31 option, you got the...

DadsBee, thanks for sharing your before and after picture of the throttle pedal assembly, looks like mine. Except for the rubber seal around the gas cable. Do you have a closer picture or a stand alone picture of the grommet or bushing or what ever it is? Mine had nothing on it when I got the...

GKENT, What holds the cable into the pedal assembly? My cable freely moves through the pedal bracket and the hole in the firewall. Ther emust be a rubber grommet or seal or something that blocks the hole in the firewall to keep fumes out and hold the cable in place. Is there a c clip that...

What holds the throttle cable into the firewall or the throlttle pedal assembly. I have the stock throttle pedal assembly and it was bolted to the fireal when I picked up this basket case. But, I feel like I am missing something. The throttle cable is just loose in the throttle pedal...

Well Bummer. I guess I get to use my fabricating skills and patch the rusty spot. Thanks for the response.

I have searched Google for patch panels for the lower part of my front fenders and do not find any. I did find them offered for the Satellite/GTX 68-70 Model. Does anyone know if the GTX patch panels will work on the Coronet fenders? Thanks

Like the header says, who or where can you order the correct front brake drums for a 69 Super Bee w 4-speed. Ones I have looked hat have the wrong size center register. Too big for the hub. My Bee has 383 and 4 speed. Number on left front is L-35924-9. Not sure what size it is as I have not...

No I am the third owner per info relayed to me by the second owners son. It was like this when I bought it.

no not upside down. And they are on the correct sides. Justy has a large gap between the lower window seal and the quarter. I realize they were not designed to be 100% water tight, but a quarter inch gap is way too much to expect it to keep pine nedles and other things out of the bottom of...

How do u adjust the 1/4 windows to seL against the 1-4 panel? My coronet has a 1/4” gap on the bottom where it should be sealed up tight against the 1/4 How do u adjust it on both sides?