Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Holley says bump up air
Bleeder screws on 4 corners 3 sizes reajust idle mixer screws then put in power valve after highest vacuum reading leave #32 squirted nozzles on should cure it
Bought new 4150 hp 850 double pumper replaced old one same carb just older. Installed it dialed it inane set floats. getting bog when slamming gas Holley told me go higher squirter nozzles did that. didn't do it then they told me it has 6.5 power valve in it. It has a 4.5 in it. so I bought a...
Yes I'm using a ballast resistor the ballast resistor and all other electrical parts were change two years ago we replaced carb last week still all dialed in and timed .start running shitty high speed the backfiring coil was junk replaced it car ran fine went for a ride yesterday same thing took...
my 440 seems to be eating coils 2 one replaced took distributor cap . Put new carb. On it backfires . Check timing ok and coils gone happened twice. Took cap off I have electronic ignition rotor seems to be rubbing metal brass contacts on cap . Wondering if I need new distributor .
I got dual contact single filliment in there bulbs fine when u hit brakes dome light an map light come on no brake light on tail light when u hit brake when doors are shut I got power to dome light . This happened all of a sudden the other night. Only thing I've done is replace coil. Some weird...
got in gtx tonight dome light wants to stay on with doors shut map light on also when u take bulb out of dome light map shuts off and map light works fine any help thank u