Recent content by TOMRR

Sold

Try Again just emptied it

I have two New Master cylinders that will work on a 69 RR. As you can see they are diff. styles. $20.00 Each Plus Shipping

I would like to run a wider tire on the back of my 69RR. I have always like things to match. On the front would be P225/70R14 and on the back would be P295/50R15. I have them on road wheels and would have to buy a set of 15's road wheels. Does any one do this !! Any issues?? Thanks Tom RR

I like Pennzoil Syncromesh.

I use the 20/50 my self in my 440

Check the ground ,My brass strip was lose and it did not look it, Checked and cured the problem !!

sent email

Thanks for reply The 070 Fan clutch has been rebuilt. can not use longer bolts not enough space between fan and pulley so would have to use studs and would lock tight them in to water pump

I need to extend my fan on my 69RR 440 HP closer to the radiator.it is into the shroud by only very little. needs to be at least 1/2 way into shroud from what I have been told My current fan clutch is a 070. does it make sense to add a spacer, I would have to use studs to do this, or should I...

e are going to install everything next week. phil said he would talk us through adjusting the carbs and any other things that pop up. You Made a real Good Choice !!!! He had to Tell My Engine builder How to Adjust them !!!!!!! I just put over 800 MILES from Mass to Carlisle PA. in July Ran...

Had mine rebuilt by Phil Fish !!! ( I bought them from him about 15+ years ago) Out standing service and always willing to talk and give Good Tect. Advice over the phone. He is the Best In my book. Installed and just adjusted the idle and just put over 800 miles Mass to Carlisle in July

Maybe" you actually have a small exhaust manifold leak that only shows up after the engine is warmed up (head/manifold OR donut gasket)? I've been fooled by that myself before & thought I had a lifter issue. This did happen to me, changed the exhaust pipes gasket and tap went away Tom C.

Now that I know the steel hood will work, I will be installing this weekend, I do not expect any issues, but if there are some left or right spacing issues how do you adjust this ? forward and up and down Hight are easy. not sure about left or right Thanks Tom C.