• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

coronet pillars fit a super bee?

Chryco69

Well-Known Member
Local time
12:09 PM
Joined
Feb 8, 2013
Messages
487
Reaction score
66
Location
Indiana
This was removed from a 69 coronet. Will it fit a 69 super bee? Thanks 20140408_132734.jpg
 
The dash boards are different. Wasn't sure if the ends were.

Posted via Topify on Android
 
A pillar trim is the same 2 door 68 -70 hardtop,coupe,standard or rallye dash
 
I have used four door Coronet pillars in a road runner.
 
I don't know how they will not fit.4 door has a taller windshield and taller pillar covers!.
 
I know, I keep hearing this, but I personaly removed from a '69 4 door Coronet, the pillars,dash pads,glove box,and put them in my '69 road runner. Fit like a glove. So unless this 4 door had pillers from a 2 door already in it, I still say that interchange.
 
I have both original pillar mouldings, and the two door is markedly shorter, and the part numbers are different. Your four door car had two door pillars in it.
 
I have both original pillar mouldings, and the two door is markedly shorter, and the part numbers are different. Your four door car had two door pillars in it.

or his memory is wrong...
i had a pair of both of them also and
the 4dr ones went in the trash...
 
Auto Transport Service
Back
Top