New Toy 73 Road Runner

Just bought this today and I can not wait to start modding it and making it my own. It will be primary a strip only car, and the goal is to run low 7's in the 1/8 in foot brake class. Here is a list of the current known mods.

340 Wedge Engine
Siamese 4 bolt splayed cap block with steel crank
13:1 high dome pistons
587 lift 303 camshaft
202/160 valves
team g pro form intake
930 dominator carb
mopar rattler balancer
727 torque flight manual reverse valve body with trans brake
3500 stall converter
dyna 60 with 5.13 gears full spool and strange 33 spline axles
ladder bar suspension
wilwood front disk brakes with pressure control and line lock
flaming river rack and pinion
msd 7al-2 ingintion and mallory fuel system
cheetah scs shifter
mini tubes with 31 x 16.5 Hoosiers (different from pictures)

Street legal Minus the lack of windshield wipers.

What else do you think I will need to get this car into the low 7's on the strip. There are other mods that are not posted and I will update later when I check the car out better.

Looking good, congrats!

Welcome aboard !! super nice car ya got there !!

What does your car run now ? and are you trying to go 7's in 1/4 or 1/8 mile ?

N.O.S is the fastest way to get there.. But not always the best way !!

Nice looking RR!

No just the 1/8 and I do not want to run NOS. I will just let it run what it runs. It was only ran one time down the track before, and they said it did not hook. I was told it ran a 12.3 in the 1/4 which is about 8.0 in the 1/8 I think.