Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i have a edelbrock carb now and wan to replace it with a 3310 do i need to make any changes to the accelerator pedal cable connection to the holley carb? thanks
I've run a 3310-3 750cfm on a stock cast-iron intake & it worked great. If you don't have any type of spacer on it, you'll need to "very lightly massage" something on the secondary shaft, passenger side, if I recall correctly. Just grind off 1/8" in one little spot...piece of cake. I remember attaching mine without the Mopar throttle linkage. I just found a convenient hole in the primary throttle lever & ran a small 25-cent hardware store nut & bolt through the hole & the throttle cable end & slid the throttle cable up or back (?) a 1/2" so it would hit WOT.