Windshield washer pump

Dennis H · Jul 10, 2019

Was working, now stopped. No power. Think it was collateral damage from efi or other underhood job. Where does this wire go? Black one secured to body by Phillips. Gotta. E a ground right? Side note, there is a wire coming from the ancient MSD Box that goes into the washer power fitting.

cr8crshr · Jul 10, 2019

Dennis that is a ground wire that you can screw to the inner fender. Hope this helps...cr8crshr/Bill :thumbsup:

dadsbee · Jul 10, 2019

Should be a riveted on end.. that broke off the wire... attached to the pump for that ground wire.

69L48Z27 · Jul 10, 2019

Looks like your pump has been re-grounded to the screw going through the MSD box. ‘Stock’, that wire from the reservoir should be crimped to the ground wire of the pump.

The plastic reservoir does not need the ground, the attachment screw for the reservoir is the ground for the pump.

69L48Z27 · Jul 10, 2019

Here’s the only pic I could find. This is on a 67, I believe my 68 was the same way. In this picture the radiator is blocking it but there’s a non-insulated crimp connector in the ground wire. Splices the tank wire to the pump wire.

oldbee · Jul 11, 2019

Originally went to one of the pump motor rivets.

Windshield washer pump

Dennis H

FBBO Gold Member

cr8crshr

Well-Known Member

dadsbee

FBBO Gold Member

69L48Z27

Well-Known Member

69L48Z27

Well-Known Member

oldbee

Well-Known Member

Similar threads